仪器网

欢迎您: 免费注册 仪器双拼网址:www.yiqi.com
首页-资讯-资料-产品-求购-招标-品牌-展会-行业应用-社区-供应商手机版
官方微信
仪器网-专业分析仪器,检测仪器平台,实验室仪器设备交易网 产品导购
VIP企业会员服务升级
仪器/ 产品中心/ 物性测试仪器/ 试验机/ 冲击试验机/冲击台/ 泊睿BR-PV-HT冰雹撞击试验机
收藏  

泊睿BR-PV-HT冰雹撞击试验机

为您推荐
详细介绍

一、系统组成
1.气动发射装置:动力源为空气,需要一个储气装置来储存空气调节压力,通过调节空气压力变化来调节发射管中冰球发射速度变化。气动发射装置需要硬件配合,包括高压气源、调压设备(调压阀和气缸)、气管和电磁阀。

2.机械移动装置:微机控制机械传动装置来改变枪管移动位置,用红外线定点来做瞄准。其中机械移动使用步进电机传动方式来实现,步进电机具有定位快速、准确的优点,能在极短时间内完成定位要求,定位精度小于1mm,实验累计误差小于5mm,远远小于IEC标准所要求的指定位置偏差不大于10mm的要求,保证实验的可靠性。

3.样品固定架:根据样品尺寸来设计机械移动装置和样品固定架。标准尺寸2000*1350(L*H),能覆盖2000*1350尺寸内被测组件的有效面。

4.速度测试装置:架于发射管之前,两个光电传感器中间距离50cm,用v=s/t来得到速度,实时显示,等下一次样品测速时改变。速度测试装置包括检测传感器、高速响应模块和软件模块三部分。系统采用性能稳定的光电传感器和可编程控制器来实现,并提供HMI人机界面做为操作终端,配合外接打印机形成实验数据报表。

二、工作原理
空压机将空气压缩至储气罐,外接压力表及25mm内径的枪管,连接处安装一气阀,由大电磁阀控制开启。
枪管前端安装光电测速装置。调节压力表,使冰球达到标准要求的冲击速度。
制作内径25mm的冰球模具。将制成的冰球置于枪管内,开启电磁阀,压缩空气推动冰球以23m/s的速度撞击光伏组件。组件受试点经冰球撞击后,经外观检查、最大功率测试、绝缘电阻测试后,判别组件质量是否合格。

三、分项介绍
1.冰球模具:标准直径为25mm。
可以根据用户需求提供一模多穴或一模一穴的冰球模具,配合实验室其他设备,如高低温实验箱制做冰球。

2.电气控制:微机控制步进驱动器和发射装置,实验数据反馈回控制器,人机界面做为操作终端,配合外接打印机形成实验数据报表。


四、技术参数
标准冰球直径:25mm系列
标准冰球质量:7.53g±2%系列
标准冰球速度:23.0m/s±2%系列

五、主要特点
BR-PV-HT冰雹撞击试验机,参照IEC 61215-2:2016等相应标准条款设计制造,用于验证组件抗冰雹撞击的能力。人工制作的冰球用于模拟冰雹,并以恒速撞击组件,模拟冰雹气候对组件的影响。


BR-PV-HT Hail Tester
Implementation of standards: IEC 61215-2:2016

Diameter
mm
Mass
g
Test velocity
m.s-1
Diameter
mm
Mass
g
Test velocity
m.s-1

25.0
35.0

45.0

7.53
20.7

43.9

23.0
27.2

30.7

55.0
65.0
75.0
80.2
132.0
203.0
33.9
36.7
39.5
From the table, we calculated the square of hail speed by 0.047~0.049 equals hail diameter. Thus we calculate the hail air resistance coefficient. When the hail free fallers accelerated to a certain stag, hail gravity and hail resistance balance final constant speed landing. Based on the above principles, our hail tester is for hail and shells by the pneumatic acceleration. When cartridge from gun, hail with constant speed bumps after components.


Vertical firing mode, solved technical problems of the acceleration of gravity of hail and speed deviation.
In order to avoid the hail breached, we give the hail added a protective device hail shell, or cartridge. The diameter of hail shell and the gun shell is very consistent. The diameter of it and the shell, very consistent gun size. High-pressure gases in this state promote cartridge directly, so speed control and speed repeatability is better.
Module mounting: > 2.2m×1.35m (compatible with larger and smaller modules)
Speed repeatability (firing success rate): > 90%
Gun positioning: laser sighting, electric control displacement
Ultra high speed optical fiber measurement system: speed reading
Low temperature test chamber temperature and deviation range: -10°C±2°C
Electronic balance: maximum weighing range 100g, accuracy 0.1mg
Gas source or silent air compressor: > 0.3MPa

Standard hail diameter: 25mm±2%
Standard hail mass: 7.53g±2%
Send speed setting: 23.0m/s (Continuously adjustable)
Speed measure accurately: ±2%
Speed windage range: ±5%
NOTE: Hail manufacturing temperature -10°C, storage temperature -4°C, This to for hail more easily out from mould.


Pass criteria:
The 11 points before and after ice impact, through EL equipment inspection crack, because cannot pass through visual inspection method.



产品直通车
X您尚未登录
账号登录
X您尚未登录
手机动态密码登录
X您尚未登录
扫码登录
在线留言
官方微信

仪器网微信服务号

扫码获取最新信息


仪器网官方订阅号

扫码获取最新信息

在线客服

咨询客服

在线客服
工作日:  9:00-18:00
联系客服 企业专属客服
电话客服:  400-822-6768
工作日:  9:00-18:00
订阅商机

仪采招微信公众号

采购信息一键获取海量商机轻松掌控