Moku:Lab多功能测量仪之200MHz锁相放大器可用于探测被噪声掩埋的微弱电压信号。直观的用户界面允许用户使用整个框图中的探针点(probe points)精确配置系统并监控其性能。
主要特色
1、数字信号处理的方框图视图,内置探针点(probe points),用于信号的监测。
2、解调信号的频率高达200 MHz
3、测量被噪声淹没的信号,动态储备超过80 dB。
Moku:Lab多功能测量仪之200MHz锁相放大器视频展示
Moku:Lab多功能测量仪之锁相放大器的应用案例
Moku:Lab多功能测量仪之锁相放大器的规格参数
Signal channel
Input characteristics
Input frequency range | 1kHz - 200MHz |
Input voltage range | ±0.5 V into 50Ω |
Input impedance | 50Ω/1MΩ |
Input coupling | AC/DC |
Demodulator
Sources | Internal Reference oscillator, Internal Auxiliary oscillator, External direct, External with phase-locked loop |
Types | Internal, External with PLL: Sine (In-phase)/Cosine (Quadrature) External direct: Sine (In-phase) |
Input gain2 | -20 dB/0 dB/+24 dB/+48 dB |
Filter mode | Low-pass filter |
Filter cut-off frequency range | 237 mHz - 3.98 MHz |
Filter time-constant | 251 ns - 4.219 s |
Filter slope | 6 dB or 12 dB per octave |
Phase shift precision | 0.001° |
Gain accuracy | ±1% |
Dynamic reserve | Better than 80 dB |
PLL frequency range | 2 MHz - 200 MHz |
PLL bandwidth | 10 kHz |
Reference oscillator
Reference and Auxiliary oscillators
Waveform | Sine |
Frequency range | 1 mHz - 200 MHz |
Frequency resolution | 3.55μHz |
Distortion | <-70 dBc for frequencies lower than 10 kHz |
<-60 dBc for frequencies greater than 10 kHz |
2+24
dB and +48 dB input gains are applied digitally and can be used to
maximise the Lock-In Amplifier’s dynamic range for weak input signals.
Signal output
Output routing
Output sources | X, Y (cartesian mode); R,Θ(polar mode); Auxiliary Oscillator |
Output processing | Direct, PID3 |
Number of output channels | 2 |
Polar-mode | 0.8 V per cycle |
Gain profiles | Proportional (P), integral (I), differential (D), integral saturation (IS), differential saturation (DS) |
Controller frequency range | 100 mHz - 10 MHz |
Proportional gain | ±60 dB |
Integrator crossover frequency | 1.00 Hz to 100 kHz |
Differentiator crossover frequency | 10 Hz to 1 MHz |
Signal output
Output voltage range (peak AC + DC) | ±0.5 mV to ±1 V into 50Ω |
Gain range | -80 dB to +80 dB |
Saving Data
Saving data
File formats | Plain text: records data using a standard CSV format |
Binary: records data using a proprietary LI format for high-speed data logging. Note: data saved using the LI format must be converted to plain text using the LI file converter available here: https://github.com/liquidinstruments/lireader | |
Maximum sampling rate | 1 MSa/s into RAM (format: *.li binary) (single channel) 500 kSa/s into RAM (format: *.li binary) (two channels) 100 kSa/s into SD card (format: *.li binary) 20 kSa/s into RAM/SD card (format: *.csv) Note: data saved to the Moku:Lab’s on-board RAM will be lost when the device is rebooted. |
Export modes | SD Card, Dropbox, E-mail and iCloud, My Files (iOS 11) |
Delayed log start time | Up to 240 hours |
Log duration | 1 second up to 240 hours |
3Only one output may have a PID controller routing at a time
Moku:Lab可用于使用外差检测和主动反馈来稳定两个激光器的相对频率和相位。 考虑以下光学系统,
Moku:Lab多功能测量仪之相位表可用于测量1kHz到200MHz之间输入信号的相位,精度为1μcycle
随着对准确度和精度越来越高的要求,微弱信号检测技术已经在很多领域变得至关重要,特别是在雷达、声纳、通信、工业
世界各个国家对直线度测量领域一直予以高度重视,并不断推出新型高精度直线度测量方法和装置,以满足日益增长的对产
很多电子工程师在测试时都会遇到这样的困扰:信号发生器输出电压、功率不够。在这种情况下,较经济实用的解决方案就
随着对准确度和精度越来越高的要求,微弱信号检测技术已经在很多领域变得至关重要,特别是在雷达、声纳、通信、工业
Liquid Instruments由澳大利亚国立大学物理系教授Daniel Shaddock创立,研发团队成员
就现在我们所用的有线电视放大器,如果出现高频偏高或低频偏低的话,如何调节?我是初学者,还不会调节放大器;所
MEMS简介:微机电系统(MEMS,Micro-Electro-Mechanical System),也叫做微
功率放大器是一种常用的电子测量仪器之一,是高校、科研单位电子类实验室不可缺少的实验设备,目前很多科研实验室都