皓天告诉您,为何灯具要做冷热冲击试验测试?
【概述】
冷热冲击试验是用于考核产品对周围环境温度急剧变化的适应性,是装备设计定型的鉴定试验和批量生产阶段的例行试验中不可缺少的试验,在有些情况下也可以用于环境应力筛选试验。
The thermal shock test is used to examine the adaptability of the product to the rapid change of ambient temperature. It is an indispensable test in the identification test of the design of equipment and the routine test in the stage of mass production. In some cases, it can also be used in the screening test of environmental stress.
【实验/设备条件】
灯具行业做冷热冲击试验的原因有:
1)、灯具的塑胶外壳无法承受环境能力,在高低温冲击时,LED塑胶外壳容易催化破坏。
2)、灯管在温度急剧变化环境下会出现烧坏的情况。
3)、照明灯的电路板芯在冷热冲击环境下容易短路。
The reasons for the lamp industry to do the cold and hot shock test are as follows:
1) the plastic shell of the lamp can not withstand the environmental capacity, when the impact of high and low temperature, the plastic shell of the LED is easy to catalysis damage.
2) the lamp tube will burn out in the environment of rapid temperature change.
3) the circuit board core of the lamp is easy to short circuit in the environment of cold and hot shock.
【样品提取】
若灯具体积大,可抽取1-2台灯具做试验,若灯具体积很小,可抽取100-200支做测试。根据贵司的的测试条件,若冲击试验有缓冲的测试要求的,则选择三箱冷热冲击试验箱。若试验要求迅速5s以内,没有缓冲要求,则选择两箱冷热冲击试验箱。
If the volume of lamps is large, 1-2 lamps can be extracted for test; if the volume of lamps is small, 100-200 lamps can be extracted for test. According to the test conditions of your company, if the impact test requires cushioning, three boxes of cold and hot impact test boxes should be selected. If the test requirement is quick within 5S and there is no buffer requirement, choose two boxes of cold and hot impact test chamber.
【实验/操作方法】
打开皓天冷热冲击试验箱,设置您所需的测试参数,举例:冲击温度设定在-40℃至150℃,做5个循环,每个循环有99组,灯具通电测试,点亮直至试验结束,灯具自动熄灭。
Open the Haotian cold and hot impact test chamber and set the test parameters you need. For example, the impact temperature is set at -40℃ to 150℃, and 5 cycles are performed, each cycle has 99 groups. The lamps are energized and lit until the end of the test, and the lamps are automatically extinguished.
【实验结果/结论】
合格的灯具在冷热冲击试验的测试过程中,灯具在经过高温高压测试后,不能出现表面脱漆、变色、开裂、材料变形等异常现象。灯具在经过冲击测试后,不能发生漏电,点等不良等电气异常现象。
Qualified lamps and lanterns in the cold and hot impact test process, the lamps and lanterns after high temperature and high pressure test, can not appear the surface paint off, discoloration, cracking, material deformation and other abnormal phenomena. After the impact test, no electrical anomalies such as leakage,
bad lighting and other electrical abnormalities.
这款测试仪器能被我们用来测试电子化学塑料金属 或者设备等,在周围环境温度的急剧改变下引起的的 反应变化或者破
冷冻食品软塑包装在低温环境下抗冲击试验的解决方案 摘要:在寒冷环境下储存的软塑包装需要有较高的耐寒性,即相
概述 旋转冲击试验早期是用来确定土体和岩石的分界面,它有很多种方法,这些方法是在Scandinavia发明的,
【概述】2015年与现在2021年后的设备技术真的是不能相提并论的,现在皓天设备的技术真是处于前卫的水平,所
【故障描述】硅胶老化,导致低温发泡层有渗水.【升级版实验/设备条件】型号TSD-80L-3P内箱容量80L内
冲击试验箱在平时多注意维护保养,避免一些故障的产生,一旦冲击试验箱出现故障的话,建议先了解冲击试验箱维修问题
检测冷热冲击试验箱的温度修复时间的流程心有多远,就能走多远,做一个永不放弃、坚定向前的人!冷热冲击试验箱用以
【概述】冷热冲击试验箱噪音过高如何处理?三厢冷热冲击试验箱在运行的过程中,如果发生噪音过大的话,就需要及时解
【概述】冷热冲击试验箱为什么会出现温度偏差过大的情况? 以-55℃冷热冲击