-
-
Masterflex Turbine Flow Sensor Kit, Tubeholder, PVDF, 5 to 120 LPM; 32 mm Barbed Connection
- 品牌:美国Masterflex
- 型号:
- 产地:美国
- 供应商报价: 面议
- 上海科学仪器有限公司 更新时间:2024-05-07 13:05:51
-
企业性质
入驻年限第9年
营业执照
- 同类产品
-
为您推荐
- 详细介绍
- Ready-to-go flow sensor system bundles for your application
- Order a kit for easy start up - flow sensor and tubes bundled together
- Modular interchangeable flow sensor systems with single-use design
- Accurate 1% of reading measurement at low flow
- Low operating cost disposable flow tubes for optimal contamination-free production
- Ideal for single-use applications while also suitable for long-term measurement
规格与描述
- 最高压力 (psi)145
- 最小流速 (LPM)3
- 最大流速 (LPM)200
- ZD工作温度 (° F)-4
- ZD工作温度 (° C)-20
- 最高工作温度 (° F)176
- 最高工作温度 (° C)80
包括
Tubeholder flow sensor (24507-04) and replacement tubes (24507-16)
主要特点
- Order a kit for easy start up - flow sensor and tubes bundled together
- Modular interchangeable flow sensor systems with single-use design
- Accurate 1% of reading measurement at low flow
- Low operating cost disposable flow tubes for optimal contamination-free production
- Ideal for single-use applications while also suitable for long-term measurement
- Flow tubes and turbine sensors are produced and tested under cleanroom conditions
- Tubeholder sensors secure your flow tube and add stability with flat base making it ideal for various applications
- Constructed with a PVDF and sapphire bearing for high chemical and corrosion resistance
- Sterilize via gamma irradiation or autoclave up to 140°C
关于该商品的更多信息
The Masterflex single-use flow sensor system is comprised of the following:
1. Sensor Housing
Tubeholder sensor secures the flow tube with a screw-down closure and has a flat base, ideal for surface or bench work. Available in both PVDF and PFA for highly corrosive applications.
2. Flow Tubes
Flow tubes come precalibrated to one point. Each flow tube has an attached label that indicates the lot number, serial number, K-factor, and 2-D bar code with all the calibration data.
3. Optional
The barcode can quickly be read by the barcode scanner making the calibration process unnecessary when exchanging a flow tube. Eliminate long downtimes and extra calibration while ensuring an accurate measurement with the barcode scanner.
Three output options are available: digital to analog converter, metering pump control system, panel-mount flow display with totalizer, and benchtop flow display with totalizer.
Calibration certificates are available for the flow tubes. Each flow tube comes calibrated without a certificate with the K-factor to 1 point at 50% of the flow range. The optional calibration certificate for the 1-point calibration can be obtained at any time. Calibration with certificate to K-factor at 5 points of flow range can be ordered at the time flow tubes are ordered.
- Masterflex Flow Tube for Tubeholder or Clamp Flow Sens
- Standard Flow Cell, 11 μL, 10 mm path length, PEEK
- Qtz SUPRASIL Flow-Through Cell 10x6.5 mm
- Scott/Cross Flow II Spares Kit
- Cross-Flow Nebulizer Tip Kit for ELAN
- ST-CONES, DURAN, ST 7/16 acc. to DIN 12249 ? / LENGTH
- ST-CONES, DURAN, ST 10/19 acc. to DIN 12249 ? / LENGT
- ST-CONES, DURAN, ST 12/21 acc. to DIN 12249 ? / LENGT
- ST-CONES, DURAN, ST 14/23 acc. to DIN 12249 ? / LENGT
- Acid and Anhydrides Kit - 120 components KIT
- 毛细管柱Equity-1 60 m×0.32 mm I.D.,1.0 μm
- SLB™-5ms 毛细管柱,15 m × 0.32 mm, df 0.50 μm