塑料管材管件热稳定性试验专用试验箱

XCB系列塑料管材管件热稳定性试验专用试验箱

一、 产品描述

XCB-300Ⅱ型塑料管材管件热稳定性试验专用试验箱主要用于管材在110℃下，管内介质为空气条件下进行的静液压试验，测定试样在规定的应力条件下，通过8760小时试验后,是否发生破坏。与静液压试验机配套使用可完成静液压状态下的热稳定性试验。

二、 产品特点

1、双层隔热玻璃门、内置观察灯，即方便用户观察试验情况，又避免了意外烫伤。

2、合理的排水装置可及时排除试验失败工位产生的积水，减少对其它工位的影响。

3、厚达90mm的保温层，降低了试验成本，提高了仪器的可靠性。

4、加热器具有自保护功能，避免了加热器的意外损坏。

5、完善的漏电保护，过热保护装置提供了对仪器及使用人员的防护。

6、全不锈钢框架和内胆，不仅美观同时增强了抗腐蚀性。

7、独特的夹具排气设计，大大减少了试验人员的劳动强度。

8、试样在试验过程中处于悬挂状态，使其符合试验标准要求。

三、符合标准

标准号

标准名称

GB/T6111-2003

《流体输送用热塑性塑料管材耐内压试验方法》

GB/T18742.2

《冷热水用聚丙烯管道系统》

GB/T18993.1—18993.3

《冷热水用氯化聚氯乙烯管道系统》

ISO10508

《冷热水系统用热塑料管材和管件》

四、技术参数

型    号：        XCB-300Ⅱ

试验箱控温范围：  室温-120℃

控温精度：        ±1℃

温度示值误差：    ±0.5℃

温度均匀度：      ±1℃

适用的管径：  Φ63mm 以下

试样长度：     500mm 以内

夹装工位：         12路

电    源：         (220-15% ～220+10%)VAC  50Hz 3.0kW 单相三线

XCB-300Ⅱ type plastic pipe fittings special test chamber for thermal stability test

Function, scope of application:

XCB-300Ⅱ type plastic pipe fittings thermal stability test special test box is mainly used for pipe at 110℃, the tube medium is air under the condition of hydrostatic test, determine the sample under the specified stress condition, through 8760 hours of test, whether there is damage. It can be used with hydrostatic testing machine to complete the thermal stability test under hydrostatic state.

Execution standard:

GB/T6111-2003 "Test method for internal pressure resistance of thermoplastic pipes for fluid Transportation"

GB/T18742.2 "Polypropylene piping system for hot and cold water"

GB/T18993.1 -- 18993.3 "Chlorinated polyvinyl chloride piping system for hot and cold water"

ISO10508 Thermoplastics pipes and fittings for hot and cold water systems

Double layer insulated glass door, built-in observation lamp, which is convenient for users to observe the test situation, but also avoid accidental burns.

Reasonable drainage device can eliminate the water generated by the failed test station in time, reduce the impact on other stations.

Thickened thermal insulation design, reduce the test cost, improve the reliability of the instrument.

◆ The heater has self-protection function to avoid the accidental damage of the heater.

◆ All stainless steel frame and liner, not only beautiful but also enhance corrosion resistance.

◆ Unique fixture exhaust design, greatly reduce the labor intensity of the test personnel.

Technical parameters: