-
-
Newport 低波前畸变反射镜调整架
- 品牌:
- 型号: Newport U100-AC2K
- 产地:美国
- 供应商报价: 面议
- 青岛森泉光电有限公司 更新时间:2024-03-27 08:54:21
-
企业性质授权代理商
入驻年限第5年
营业执照已审核
- 同类产品镜架(75件)
联系方式:赵经理0532-80982936
联系我们时请说明在仪器网(www.yiqi.com)上看到的!
-
为您推荐
- 详细介绍
为最小化波前畸变而设计
干涉仪已验证
轴向三点光学安装
The U100-AC2K ULTIMA® Aperture Base Precision Kinematic Optical Mount uses spring-loaded pawls to gently, but securely, hold high precision 1 inch (25.4 mm) diameter optics from the back against three points on the front plate of the mount. Wavefront distortion in the optic is minimized because the forces acting on the optic are axial, instead of radial and are more distributed. For applications requiring secure mounting, the pawls can be tightened further, compressing the springs, and clamping the optic between the three points on the front plate and the pawls. Like all ULTIMA mounts, thick front and rear plates and optimized, stiff springs improve the long-term stability and provide greater protection against vibrations. This mount is provided with two high precision, 100 TPI adjustment screws with knob. The actuators can be quickly changed to accommodate a broad selection of adjustment screws, micrometers, and motorized actuators. ULTIMA Precision Kinematic Optical Mounts minimize mount-induced wavefront distortion. Side set screw mounting, found in most optical mounts, is fine for many applications but our tests have shown that this technique induces wavefront distortion in the optic if the set screw is tightened a little too much. Convenient clearance mounting holes on each of two sides are compatible with either 8-32 or M4 screws providing quicker, more precise, and more secure mounting.
- 机制Kinematic
- 镜片直径25.4 mm
- 调节螺纹100 TPI
- 调节θx, θy
- 灵敏度3.8 arc sec
- 角度范围±7°
- 材料Anodized Aluminum
- 驱动方式Knob, locking
- 螺纹类型8-32 (M4) CLR
- 镜片厚度5.1-8.1 mm
- 特征Center Mount
- 产品优势
- 低波前畸变 (LWD) 光学调整架经过特殊设计,能够以不会引起光学畸变的方式固定反射镜。它们使用轴向三点安装方法轻轻但牢固地固定具有紧密平面度公差的光学元件。
为zui小化波前畸变而设计
干涉仪已验证
轴向三点光学安装