供应商：赛默飞化学分析仪器

可同时连接多达4 个电极

供应商：赛默飞化学分析仪器

Thermo Fisher Scientific 公司有两种型号的控制器可作为于AquaSensorsTM 系列传感器的通用操作平台。

供应商：柜谷科技发展（上海）有限公司

HT60B可编程PID控制器是一个温度和过程控制器。根据设定点（stp）值来控制升温，可配用的一个输入端（温度或过程），和两个输出（加热或冷却控制或温度超限警报信号。可配备RS-232或EIA 845的通信线。该控制器容易使用，参数设置可以被锁定，从而防止意外删除。

供应商：科尔帕默仪器（上海）有限公司

Measures free or total chlorine using EPA-approved colorimetric DPD method User-selectable cycle timesTwo user-selectable alarms4 to 20 mA and RS-485 with Modbus output 规格与描述 描述Total Chlorine Reagent, powder, 12 month supply .cole-table-ul{width:100%;margin:0;padding:0;list-style:none;}.cole-table-ul li{background:#efefef;border:1px #ddd solid;border-top:0;display:inline-block;width:100%;}.cole-table-ul li:first-child{border-top:1px #ddd solid}.cole-table-ul li:nth-child(odd){background:#f7f7f7}.cole-table-ul li span{float:left;padding-left:12px;width:45%;padding:8px 0 7px 15px;font-size:14px;line-height:18px}.cole-table-ul li span.spec-label-box{border-right:1px #ddd solid}.cole-table-ul li span.spec-value-box{border-left:1px #ddd solid;margin-left:-1px}.cole-table-ul .spec-value-box{margin-left:10px;padding-right:5px} 包括 Monitor only, order reagents, supply and drain tubing, and power cords separately. 主要特点 User-selectable cycle timesTwo user-selectable alarms4 to 20 mA and RS-485 with Modbus output 关于该商品的更多信息 The monitor uses economical and reliable colorimetric DPD (N,N-diethyl-p-phenylenediamine) chemistry to measure either free or total chlorine up to 10 mg/L. Measurement cycles can be set between 90 seconds up to 10 minutes for reagent and control optimization. Measurements are preceded by a zero measurement to compensate for color of the sample. The monitor features a scaleable 4 to 20 mA output and RS-485 with Modbus, as well as two user-selectable alarm relays.The monitor is housed in a NEMA 4X (IP66) corrosion-resistant enclosure that comes ready to surface mount. The enclosure has a transparent cover that allow direct view of the measured value as well as the sample chamber and removable cuvette. Sample to the unit is provided by user-supplied 1/2" OD semi-rigid or rigid tubing that connects by a push-to-connect fitting at pressures of 1 to 200 psi. The sample drain is a 1/2" hose barbed fitting; order drain hose separately. The monitor accepts 100 to 240 VAC, 47 to 63 Hz power input,;order power cord separately below or directly hard wire. Monitor does not include dry chemical reagents; order separately.

供应商：科尔帕默仪器（上海）有限公司

Measures free or total chlorine using EPA-approved colorimetric DPD method User-selectable cycle timesTwo user-selectable alarms4 to 20 mA and RS-485 with Modbus output 规格与描述 描述Free Chlorine Reagent, powder, 12 month supply .cole-table-ul{width:100%;margin:0;padding:0;list-style:none;}.cole-table-ul li{background:#efefef;border:1px #ddd solid;border-top:0;display:inline-block;width:100%;}.cole-table-ul li:first-child{border-top:1px #ddd solid}.cole-table-ul li:nth-child(odd){background:#f7f7f7}.cole-table-ul li span{float:left;padding-left:12px;width:45%;padding:8px 0 7px 15px;font-size:14px;line-height:18px}.cole-table-ul li span.spec-label-box{border-right:1px #ddd solid}.cole-table-ul li span.spec-value-box{border-left:1px #ddd solid;margin-left:-1px}.cole-table-ul .spec-value-box{margin-left:10px;padding-right:5px} 包括 Monitor only, order reagents, supply and drain tubing, and power cords separately. 主要特点 User-selectable cycle timesTwo user-selectable alarms4 to 20 mA and RS-485 with Modbus output 关于该商品的更多信息 The monitor uses economical and reliable colorimetric DPD (N,N-diethyl-p-phenylenediamine) chemistry to measure either free or total chlorine up to 10 mg/L. Measurement cycles can be set between 90 seconds up to 10 minutes for reagent and control optimization. Measurements are preceded by a zero measurement to compensate for color of the sample. The monitor features a scaleable 4 to 20 mA output and RS-485 with Modbus, as well as two user-selectable alarm relays.The monitor is housed in a NEMA 4X (IP66) corrosion-resistant enclosure that comes ready to surface mount. The enclosure has a transparent cover that allow direct view of the measured value as well as the sample chamber and removable cuvette. Sample to the unit is provided by user-supplied 1/2" OD semi-rigid or rigid tubing that connects by a push-to-connect fitting at pressures of 1 to 200 psi. The sample drain is a 1/2" hose barbed fitting; order drain hose separately. The monitor accepts 100 to 240 VAC, 47 to 63 Hz power input,;order power cord separately below or directly hard wire. Monitor does not include dry chemical reagents; order separately.

供应商：科尔帕默仪器（上海）有限公司

Measures free or total chlorine using EPA-approved colorimetric DPD method User-selectable cycle timesTwo user-selectable alarms4 to 20 mA and RS-485 with Modbus output 规格与描述 描述Total Chlorine Reagent, powder, 60 day supply .cole-table-ul{width:100%;margin:0;padding:0;list-style:none;}.cole-table-ul li{background:#efefef;border:1px #ddd solid;border-top:0;display:inline-block;width:100%;}.cole-table-ul li:first-child{border-top:1px #ddd solid}.cole-table-ul li:nth-child(odd){background:#f7f7f7}.cole-table-ul li span{float:left;padding-left:12px;width:45%;padding:8px 0 7px 15px;font-size:14px;line-height:18px}.cole-table-ul li span.spec-label-box{border-right:1px #ddd solid}.cole-table-ul li span.spec-value-box{border-left:1px #ddd solid;margin-left:-1px}.cole-table-ul .spec-value-box{margin-left:10px;padding-right:5px} 包括 Monitor only, order reagents, supply and drain tubing, and power cords separately. 主要特点 User-selectable cycle timesTwo user-selectable alarms4 to 20 mA and RS-485 with Modbus output 关于该商品的更多信息 The monitor uses economical and reliable colorimetric DPD (N,N-diethyl-p-phenylenediamine) chemistry to measure either free or total chlorine up to 10 mg/L. Measurement cycles can be set between 90 seconds up to 10 minutes for reagent and control optimization. Measurements are preceded by a zero measurement to compensate for color of the sample. The monitor features a scaleable 4 to 20 mA output and RS-485 with Modbus, as well as two user-selectable alarm relays.The monitor is housed in a NEMA 4X (IP66) corrosion-resistant enclosure that comes ready to surface mount. The enclosure has a transparent cover that allow direct view of the measured value as well as the sample chamber and removable cuvette. Sample to the unit is provided by user-supplied 1/2" OD semi-rigid or rigid tubing that connects by a push-to-connect fitting at pressures of 1 to 200 psi. The sample drain is a 1/2" hose barbed fitting; order drain hose separately. The monitor accepts 100 to 240 VAC, 47 to 63 Hz power input,;order power cord separately below or directly hard wire. Monitor does not include dry chemical reagents; order separately.

供应商：科尔帕默仪器（上海）有限公司

Measures free or total chlorine using EPA-approved colorimetric DPD method User-selectable cycle timesTwo user-selectable alarms4 to 20 mA and RS-485 with Modbus output 规格与描述 描述Free Chlorine Reagent, powder, 60 day supply .cole-table-ul{width:100%;margin:0;padding:0;list-style:none;}.cole-table-ul li{background:#efefef;border:1px #ddd solid;border-top:0;display:inline-block;width:100%;}.cole-table-ul li:first-child{border-top:1px #ddd solid}.cole-table-ul li:nth-child(odd){background:#f7f7f7}.cole-table-ul li span{float:left;padding-left:12px;width:45%;padding:8px 0 7px 15px;font-size:14px;line-height:18px}.cole-table-ul li span.spec-label-box{border-right:1px #ddd solid}.cole-table-ul li span.spec-value-box{border-left:1px #ddd solid;margin-left:-1px}.cole-table-ul .spec-value-box{margin-left:10px;padding-right:5px} 包括 Monitor only, order reagents, supply and drain tubing, and power cords separately. 主要特点 User-selectable cycle timesTwo user-selectable alarms4 to 20 mA and RS-485 with Modbus output 关于该商品的更多信息 The monitor uses economical and reliable colorimetric DPD (N,N-diethyl-p-phenylenediamine) chemistry to measure either free or total chlorine up to 10 mg/L. Measurement cycles can be set between 90 seconds up to 10 minutes for reagent and control optimization. Measurements are preceded by a zero measurement to compensate for color of the sample. The monitor features a scaleable 4 to 20 mA output and RS-485 with Modbus, as well as two user-selectable alarm relays.The monitor is housed in a NEMA 4X (IP66) corrosion-resistant enclosure that comes ready to surface mount. The enclosure has a transparent cover that allow direct view of the measured value as well as the sample chamber and removable cuvette. Sample to the unit is provided by user-supplied 1/2" OD semi-rigid or rigid tubing that connects by a push-to-connect fitting at pressures of 1 to 200 psi. The sample drain is a 1/2" hose barbed fitting; order drain hose separately. The monitor accepts 100 to 240 VAC, 47 to 63 Hz power input,;order power cord separately below or directly hard wire. Monitor does not include dry chemical reagents; order separately.

供应商：科尔帕默仪器（上海）有限公司

Measures free or total chlorine using EPA-approved colorimetric DPD method User-selectable cycle timesTwo user-selectable alarms4 to 20 mA and RS-485 with Modbus output 规格与描述 描述Total Chlorine Reagent, powder, 30 day supply .cole-table-ul{width:100%;margin:0;padding:0;list-style:none;}.cole-table-ul li{background:#efefef;border:1px #ddd solid;border-top:0;display:inline-block;width:100%;}.cole-table-ul li:first-child{border-top:1px #ddd solid}.cole-table-ul li:nth-child(odd){background:#f7f7f7}.cole-table-ul li span{float:left;padding-left:12px;width:45%;padding:8px 0 7px 15px;font-size:14px;line-height:18px}.cole-table-ul li span.spec-label-box{border-right:1px #ddd solid}.cole-table-ul li span.spec-value-box{border-left:1px #ddd solid;margin-left:-1px}.cole-table-ul .spec-value-box{margin-left:10px;padding-right:5px} 包括 Monitor only, order reagents, supply and drain tubing, and power cords separately. 主要特点 User-selectable cycle timesTwo user-selectable alarms4 to 20 mA and RS-485 with Modbus output 关于该商品的更多信息 The monitor uses economical and reliable colorimetric DPD (N,N-diethyl-p-phenylenediamine) chemistry to measure either free or total chlorine up to 10 mg/L. Measurement cycles can be set between 90 seconds up to 10 minutes for reagent and control optimization. Measurements are preceded by a zero measurement to compensate for color of the sample. The monitor features a scaleable 4 to 20 mA output and RS-485 with Modbus, as well as two user-selectable alarm relays.The monitor is housed in a NEMA 4X (IP66) corrosion-resistant enclosure that comes ready to surface mount. The enclosure has a transparent cover that allow direct view of the measured value as well as the sample chamber and removable cuvette. Sample to the unit is provided by user-supplied 1/2" OD semi-rigid or rigid tubing that connects by a push-to-connect fitting at pressures of 1 to 200 psi. The sample drain is a 1/2" hose barbed fitting; order drain hose separately. The monitor accepts 100 to 240 VAC, 47 to 63 Hz power input,;order power cord separately below or directly hard wire. Monitor does not include dry chemical reagents; order separately.

供应商：科尔帕默仪器（上海）有限公司

Measures free or total chlorine using EPA-approved colorimetric DPD method User-selectable cycle timesTwo user-selectable alarms4 to 20 mA and RS-485 with Modbus output 规格与描述 描述Free Chlorine Reagent, powder, 30 day supply .cole-table-ul{width:100%;margin:0;padding:0;list-style:none;}.cole-table-ul li{background:#efefef;border:1px #ddd solid;border-top:0;display:inline-block;width:100%;}.cole-table-ul li:first-child{border-top:1px #ddd solid}.cole-table-ul li:nth-child(odd){background:#f7f7f7}.cole-table-ul li span{float:left;padding-left:12px;width:45%;padding:8px 0 7px 15px;font-size:14px;line-height:18px}.cole-table-ul li span.spec-label-box{border-right:1px #ddd solid}.cole-table-ul li span.spec-value-box{border-left:1px #ddd solid;margin-left:-1px}.cole-table-ul .spec-value-box{margin-left:10px;padding-right:5px} 包括 Monitor only, order reagents, supply and drain tubing, and power cords separately. 主要特点 User-selectable cycle timesTwo user-selectable alarms4 to 20 mA and RS-485 with Modbus output 关于该商品的更多信息 The monitor uses economical and reliable colorimetric DPD (N,N-diethyl-p-phenylenediamine) chemistry to measure either free or total chlorine up to 10 mg/L. Measurement cycles can be set between 90 seconds up to 10 minutes for reagent and control optimization. Measurements are preceded by a zero measurement to compensate for color of the sample. The monitor features a scaleable 4 to 20 mA output and RS-485 with Modbus, as well as two user-selectable alarm relays.The monitor is housed in a NEMA 4X (IP66) corrosion-resistant enclosure that comes ready to surface mount. The enclosure has a transparent cover that allow direct view of the measured value as well as the sample chamber and removable cuvette. Sample to the unit is provided by user-supplied 1/2" OD semi-rigid or rigid tubing that connects by a push-to-connect fitting at pressures of 1 to 200 psi. The sample drain is a 1/2" hose barbed fitting; order drain hose separately. The monitor accepts 100 to 240 VAC, 47 to 63 Hz power input,;order power cord separately below or directly hard wire. Monitor does not include dry chemical reagents; order separately.

供应商：科尔帕默仪器（上海）有限公司

Measures free or total chlorine using EPA-approved colorimetric DPD method User-selectable cycle timesTwo user-selectable alarms4 to 20 mA and RS-485 with Modbus output 规格与描述 控制类型On/Off显示类型LCD输出电流4-20mA宽度 (cm)32.7高度 (cm)33.34宽度 (in)12高度 (in)13深度 (in)5 1/16描述Online Chlorine Monitor, 100 to 240 VAC, 47 to 63 Hz .cole-table-ul{width:100%;margin:0;padding:0;list-style:none;}.cole-table-ul li{background:#efefef;border:1px #ddd solid;border-top:0;display:inline-block;width:100%;}.cole-table-ul li:first-child{border-top:1px #ddd solid}.cole-table-ul li:nth-child(odd){background:#f7f7f7}.cole-table-ul li span{float:left;padding-left:12px;width:45%;padding:8px 0 7px 15px;font-size:14px;line-height:18px}.cole-table-ul li span.spec-label-box{border-right:1px #ddd solid}.cole-table-ul li span.spec-value-box{border-left:1px #ddd solid;margin-left:-1px}.cole-table-ul .spec-value-box{margin-left:10px;padding-right:5px} 包括 Monitor only, order reagents, supply and drain tubing, and power cords separately. 主要特点 User-selectable cycle timesTwo user-selectable alarms4 to 20 mA and RS-485 with Modbus output 关于该商品的更多信息 The monitor uses economical and reliable colorimetric DPD (N,N-diethyl-p-phenylenediamine) chemistry to measure either free or total chlorine up to 10 mg/L. Measurement cycles can be set between 90 seconds up to 10 minutes for reagent and control optimization. Measurements are preceded by a zero measurement to compensate for color of the sample. The monitor features a scaleable 4 to 20 mA output and RS-485 with Modbus, as well as two user-selectable alarm relays.The monitor is housed in a NEMA 4X (IP66) corrosion-resistant enclosure that comes ready to surface mount. The enclosure has a transparent cover that allow direct view of the measured value as well as the sample chamber and removable cuvette. Sample to the unit is provided by user-supplied 1/2" OD semi-rigid or rigid tubing that connects by a push-to-connect fitting at pressures of 1 to 200 psi. The sample drain is a 1/2" hose barbed fitting; order drain hose separately. The monitor accepts 100 to 240 VAC, 47 to 63 Hz power input,;order power cord separately below or directly hard wire. Monitor does not include dry chemical reagents; order separately.

供应商：科尔帕默仪器（上海）有限公司

Ion concentration controller monitors and controls a variety of ions! 规格与描述 控制类型On/Off显示类型LCDpH 分辨率0.01/0.1/1输出报警1 SPDT (220vAC, 5A)输出电流0-20mA or 4-20mA输出继电器2 SPDT relays功率 (VAC)110 / 220功率 (Hz)50/60宽度 (cm)9.53高度 (cm)9.53宽度 (in)3 3/4高度 (in)3 3/4深度 (in)6描述Ion Concentration Controller .cole-table-ul{width:100%;margin:0;padding:0;list-style:none;}.cole-table-ul li{background:#efefef;border:1px #ddd solid;border-top:0;display:inline-block;width:100%;}.cole-table-ul li:first-child{border-top:1px #ddd solid}.cole-table-ul li:nth-child(odd){background:#f7f7f7}.cole-table-ul li span{float:left;padding-left:12px;width:45%;padding:8px 0 7px 15px;font-size:14px;line-height:18px}.cole-table-ul li span.spec-label-box{border-right:1px #ddd solid}.cole-table-ul li span.spec-value-box{border-left:1px #ddd solid;margin-left:-1px}.cole-table-ul .spec-value-box{margin-left:10px;padding-right:5px} 关于该商品的更多信息 This ion concentration controller is perfect for in-line batch processing, control processing, or water treatment. Connect an ion-selective electrode to the controller to monitor the concentration of ions. Microprocessor-based controller continuously displays current ion reading with relay status. Relays are triggered when current concentration reaches high or low setpoints. Connect warning lights or buzzers to relays to signal alarm conditions. To use as an automatic processing system, connect pumps or valves directly to relays. Connect to a printer, datalogger, or computer to analog output (0 to 20 or 4 to 20 mA) for a continuous record of readings and alarm conditions.

供应商：科尔帕默仪器（上海）有限公司

An economical replacement for other chlorine and chlorine dioxide sensors 4 to 20 mA output signal feeds directly into most PLCs, dataloggers, or chart recordersMultiple ranges available 规格与描述 电极体材料PVC离子选择性电极Free chlorine最小 ISE (ppm)0最大 ISE (ppm)2准确性±5% full scale分辨率0.02 ppm温度补偿Yes最大流量0.2 to 0.6 GPM最高压力 (psi)14.7输出4 to 20 mA描述Free Chlorine Sensor, 0 to 2 ppm, 4 to 20 mA output .cole-table-ul{width:100%;margin:0;padding:0;list-style:none;}.cole-table-ul li{background:#efefef;border:1px #ddd solid;border-top:0;display:inline-block;width:100%;}.cole-table-ul li:first-child{border-top:1px #ddd solid}.cole-table-ul li:nth-child(odd){background:#f7f7f7}.cole-table-ul li span{float:left;padding-left:12px;width:45%;padding:8px 0 7px 15px;font-size:14px;line-height:18px}.cole-table-ul li span.spec-label-box{border-right:1px #ddd solid}.cole-table-ul li span.spec-value-box{border-left:1px #ddd solid;margin-left:-1px}.cole-table-ul .spec-value-box{margin-left:10px;padding-right:5px} 主要特点 4 to 20 mA output signal feeds directly into most PLCs, dataloggers, or chart recordersMultiple ranges available 关于该商品的更多信息 Designed for use in water treatment applications. Sensors measure on-line, in real-time, and are available in two ranges for detecting ppm levels of chlorine dioxide within a pH range of 4 to 11. Sensors have some cross sensitivity with ozone. Three levels of free chlorine can be measured between pH 5.5 to 8.0. Sensors have some cross reactivity with ozone, bromine, and chlorine dioxide.Sensors feature an internal ATC and signal conditioner to provide a 4 to 20 mA output signal over the measurement range. Sensors and flow cells can be used for new installations or as replacements for other 4 to 20 mA output sensors. Install in existing loop-powered systems or order powered panel meter 94785-12. Service life exceeds one year in most applications. Membrane caps and fill solution can be replaced to maximize sensor life; order separately.

供应商：科尔帕默仪器（上海）有限公司

An economical replacement for other chlorine and chlorine dioxide sensors 4 to 20 mA output signal feeds directly into most PLCs, dataloggers, or chart recordersMultiple ranges available 规格与描述 电极体材料PVC离子选择性电极Free chlorine最小 ISE (ppm)0最大 ISE (ppm)10准确性±5% full scale分辨率0.1 ppm温度补偿Yes最大流量0.2 to 0.6 GPM最高压力 (psi)14.7输出4 to 20 mA描述Free Chlorine Sensor, 0 to 10 ppm, 4 to 20 mA output .cole-table-ul{width:100%;margin:0;padding:0;list-style:none;}.cole-table-ul li{background:#efefef;border:1px #ddd solid;border-top:0;display:inline-block;width:100%;}.cole-table-ul li:first-child{border-top:1px #ddd solid}.cole-table-ul li:nth-child(odd){background:#f7f7f7}.cole-table-ul li span{float:left;padding-left:12px;width:45%;padding:8px 0 7px 15px;font-size:14px;line-height:18px}.cole-table-ul li span.spec-label-box{border-right:1px #ddd solid}.cole-table-ul li span.spec-value-box{border-left:1px #ddd solid;margin-left:-1px}.cole-table-ul .spec-value-box{margin-left:10px;padding-right:5px} 主要特点 4 to 20 mA output signal feeds directly into most PLCs, dataloggers, or chart recordersMultiple ranges available 关于该商品的更多信息 Designed for use in water treatment applications. Sensors measure on-line, in real-time, and are available in two ranges for detecting ppm levels of chlorine dioxide within a pH range of 4 to 11. Sensors have some cross sensitivity with ozone. Three levels of free chlorine can be measured between pH 5.5 to 8.0. Sensors have some cross reactivity with ozone, bromine, and chlorine dioxide.Sensors feature an internal ATC and signal conditioner to provide a 4 to 20 mA output signal over the measurement range. Sensors and flow cells can be used for new installations or as replacements for other 4 to 20 mA output sensors. Install in existing loop-powered systems or order powered panel meter 94785-12. Service life exceeds one year in most applications. Membrane caps and fill solution can be replaced to maximize sensor life; order separately.

供应商：科尔帕默仪器（上海）有限公司

An economical replacement for other chlorine and chlorine dioxide sensors 4 to 20 mA output signal feeds directly into most PLCs, dataloggers, or chart recordersMultiple ranges available 规格与描述 电极体材料PVC离子选择性电极Chlorine dioxide最小 ISE (ppm)0最大 ISE (ppm)2准确性±5% full scale分辨率0.02 ppm温度补偿Yes最大流量0.2 to 0.6 GPM最高压力 (psi)14.7输出4 to 20 mA描述Chlorine Dioxide Sensor, 0 to 2 ppm, 4 to 20 mA output .cole-table-ul{width:100%;margin:0;padding:0;list-style:none;}.cole-table-ul li{background:#efefef;border:1px #ddd solid;border-top:0;display:inline-block;width:100%;}.cole-table-ul li:first-child{border-top:1px #ddd solid}.cole-table-ul li:nth-child(odd){background:#f7f7f7}.cole-table-ul li span{float:left;padding-left:12px;width:45%;padding:8px 0 7px 15px;font-size:14px;line-height:18px}.cole-table-ul li span.spec-label-box{border-right:1px #ddd solid}.cole-table-ul li span.spec-value-box{border-left:1px #ddd solid;margin-left:-1px}.cole-table-ul .spec-value-box{margin-left:10px;padding-right:5px} 主要特点 4 to 20 mA output signal feeds directly into most PLCs, dataloggers, or chart recordersMultiple ranges available 关于该商品的更多信息 Designed for use in water treatment applications. Sensors measure on-line, in real-time, and are available in two ranges for detecting ppm levels of chlorine dioxide within a pH range of 4 to 11. Sensors have some cross sensitivity with ozone. Three levels of free chlorine can be measured between pH 5.5 to 8.0. Sensors have some cross reactivity with ozone, bromine, and chlorine dioxide.Sensors feature an internal ATC and signal conditioner to provide a 4 to 20 mA output signal over the measurement range. Sensors and flow cells can be used for new installations or as replacements for other 4 to 20 mA output sensors. Install in existing loop-powered systems or order powered panel meter 94785-12. Service life exceeds one year in most applications. Membrane caps and fill solution can be replaced to maximize sensor life; order separately.

供应商：科尔帕默仪器（上海）有限公司

Accurately monitor sodium levels in the ppb range Ideal for power plant monitoring of steam turbines and stainless steel generatorsSodium ion range: 0.1 ppb to 10 ppm 规格与描述 外壳材料Glass, combination描述Low Level Sodium Electrode, S7 connector .cole-table-ul{width:100%;margin:0;padding:0;list-style:none;}.cole-table-ul li{background:#efefef;border:1px #ddd solid;border-top:0;display:inline-block;width:100%;}.cole-table-ul li:first-child{border-top:1px #ddd solid}.cole-table-ul li:nth-child(odd){background:#f7f7f7}.cole-table-ul li span{float:left;padding-left:12px;width:45%;padding:8px 0 7px 15px;font-size:14px;line-height:18px}.cole-table-ul li span.spec-label-box{border-right:1px #ddd solid}.cole-table-ul li span.spec-value-box{border-left:1px #ddd solid;margin-left:-1px}.cole-table-ul .spec-value-box{margin-left:10px;padding-right:5px} 主要特点 Ideal for power plant monitoring of steam turbines and stainless steel generatorsSodium ion range: 0.1 ppb to 10 ppm 关于该商品的更多信息 Economical alternative to accurately detect sodium ion impurities in the ppb range. Early detection helps to prevent sodium ion stress, corrosion, and cracking. Glass body combination electrode has an ammonia chloride reference solution. Rlectrode is avaliable with a BNC connector or a S7/detachable lead connection.Model 94785-04 comes with an S7 connector. Order 3-ft (1-m) cable with CD/SN6-to-male BNC connector 05659-12 separately.

供应商：科尔帕默仪器（上海）有限公司

Accurately monitor sodium levels in the ppb range Ideal for power plant monitoring of steam turbines and stainless steel generatorsSodium ion range: 0.1 ppb to 10 ppm 规格与描述 外壳材料Glass, combination描述Low Level Sodium ISE for Process with BNC .cole-table-ul{width:100%;margin:0;padding:0;list-style:none;}.cole-table-ul li{background:#efefef;border:1px #ddd solid;border-top:0;display:inline-block;width:100%;}.cole-table-ul li:first-child{border-top:1px #ddd solid}.cole-table-ul li:nth-child(odd){background:#f7f7f7}.cole-table-ul li span{float:left;padding-left:12px;width:45%;padding:8px 0 7px 15px;font-size:14px;line-height:18px}.cole-table-ul li span.spec-label-box{border-right:1px #ddd solid}.cole-table-ul li span.spec-value-box{border-left:1px #ddd solid;margin-left:-1px}.cole-table-ul .spec-value-box{margin-left:10px;padding-right:5px} 主要特点 Ideal for power plant monitoring of steam turbines and stainless steel generatorsSodium ion range: 0.1 ppb to 10 ppm 关于该商品的更多信息 Economical alternative to accurately detect sodium ion impurities in the ppb range. Early detection helps to prevent sodium ion stress, corrosion, and cracking. Glass body combination electrode has an ammonia chloride reference solution. Rlectrode is avaliable with a BNC connector or a S7/detachable lead connection.Model 94785-02 includes 3-ft (1-m) lead wire with BNC connector.

供应商：北京卓立汉光仪器有限公司

Mx 系列多轴位置调试系统是卓立汉光通过组合、优化等方法完成空间位置定位的解决方案。

供应商：北京卓立汉光仪器有限公司

桁架系统主要是采用双X轴或者双Z轴的单一或组合驱动。

供应商：北京卓立汉光仪器有限公司

Gx 系列万向关节系统是卓立汉光为适应空间方位调节的高精度、高重复性和长寿命等情况专门设计的精密型电控关节系统。

供应商：北京卓立汉光仪器有限公司

SR 系列两相步进电机驱动器是基于PID 电流控制算法设计的高性价比细分型驱动器，具有优越的性能表现，高速大力矩输出，低噪音，低振动，低发热，特别适合OEM 客户的大批量应用场合。

供应商：北京卓立汉光仪器有限公司

SR 系列两相步进电机驱动器是基于PID 电流控制算法设计的高性价比细分型驱动器，具有优越的性能表现，高速大力矩输出，低噪音，低振动，低发热，特别适合OEM 客户的大批量应用场合。

供应商：北京卓立汉光仪器有限公司

SC300 系列步进电机控制箱是一款1 ～ 3 轴点对点(PTP) 位置定位集成控制系统，特别针对位移台/ 旋转台的控制，内置性能优良的步进电机驱动器，控制功能强

供应商：北京卓立汉光仪器有限公司

MC600 系列电移台控制器，采用32 位DSP 处理器控制，可实现三轴直线插补( 对于4 轴控制器) 和两轴圆弧插补( 对于2 或4 轴控制器)

供应商：北京卓立汉光仪器有限公司

TMC-USB 控制方案是基于PC 机、运动控制卡的多维多种类型电机的整体解决方案。

供应商：赛默飞化学分析仪器

可同时连接多达247只Datastick传感器（任意组合） 增加Datastick传感器时无需增加输入模块 支持多种通讯协议 连接Datastick传感器,可“即插即用”，无需初始化系统 ​盘装或壁挂式安装

供应商：深圳三思纵横科技股份有限公司

DSC是专用于自动化控制的IC，内部是DSP+MCU的组合。集成了DSP运算速度快和MCU对I/O口控制能力强的优点，整体性能明显优于单纯的DSP或32位单片机。由于它被开发的原始目标是自动控制，内部继承了硬件的自动控制所需模块如PWM、QEI等使系统的关键性能完全由硬件模块实现，保证了系统的安全平稳运行。

供应商：岛津（上海）实验器材有限公司

更多产品规格与货号，请详询客服或致电咨询，谢谢！规格一：数量1 #tab_dj{background-color: #fff; border: 1px solid #e8e8eb; line-height:40px;} #tab_dj tr{background: #f5f5f5; text-align:center;}#tab_dj tr td{width:14%}货号：232-08045-02 货号：232-08045-02中文名：控制器英文名：Actuator Controler使用机型：溶出仪包装规格：数量1

供应商：岛津（上海）实验器材有限公司

更多产品规格与货号，请详询客服或致电咨询，谢谢！规格一：数量1 #tab_dj{background-color: #fff; border: 1px solid #e8e8eb; line-height:40px;} #tab_dj tr{background: #f5f5f5; text-align:center;}#tab_dj tr td{width:14%}货号：232-08037-04 货号：232-08037-04中文名：控制板英文名：Control Board,SSAS使用机型：溶出仪包装规格：数量1其他参数：特殊商品，请咨询客服

供应商：岛津（上海）实验器材有限公司

更多产品规格与货号，请详询客服或致电咨询，谢谢！规格一：数量1 #tab_dj{background-color: #fff; border: 1px solid #e8e8eb; line-height:40px;} #tab_dj tr{background: #f5f5f5; text-align:center;}#tab_dj tr td{width:14%}货号：232-08037-01 货号：232-08037-01中文名：控制主板英文名：Control board,SNTR使用机型：溶出仪包装规格：数量1其他参数：特殊商品，请咨询客服

供应商：岛津（上海）实验器材有限公司

更多产品规格与货号，请详询客服或致电咨询，谢谢！规格一：数量1 #tab_dj{background-color: #fff; border: 1px solid #e8e8eb; line-height:40px;} #tab_dj tr{background: #f5f5f5; text-align:center;}#tab_dj tr td{width:14%}货号：211-84042-93 货号：211-84042-93中文名：CPU控制器英文名：DOS CON ICES-8100-2使用机型：用于ICPS-8100包装规格：数量1其他参数：维修品，特殊商品，请咨询客服

供应商：岛津（上海）实验器材有限公司

更多产品规格与货号，请详询客服或致电咨询，谢谢！规格一：数量1 #tab_dj{background-color: #fff; border: 1px solid #e8e8eb; line-height:40px;} #tab_dj tr{background: #f5f5f5; text-align:center;}#tab_dj tr td{width:14%}货号：211-84042-92 货号：211-84042-92中文名：CPU控制器英文名：DOS CON ICPS-8100-1使用机型：用于ICPS-8100包装规格：数量1其他参数：维修品，特殊商品，请咨询客服

供应商：岛津（上海）实验器材有限公司

更多产品规格与货号，请详询客服或致电咨询，谢谢！规格一：数量1 #tab_dj{background-color: #fff; border: 1px solid #e8e8eb; line-height:40px;} #tab_dj tr{background: #f5f5f5; text-align:center;}#tab_dj tr td{width:14%}货号：221-48291-41 货号：221-48291-41中文名：TCD控制器英文名：TCD CONTROLLER ASSY,GC2010使用机型：GC-2010plus包装规格：1个其他参数：旧货号221-48291-91

供应商：岛津（上海）实验器材有限公司

更多产品规格与货号，请详询客服或致电咨询，谢谢！规格一：数量1 #tab_dj{background-color: #fff; border: 1px solid #e8e8eb; line-height:40px;} #tab_dj tr{background: #f5f5f5; text-align:center;}#tab_dj tr td{width:14%}货号：221-73341-41 货号：221-73341-41中文名：控制器英文名：APC-2010+,TCD使用机型：GC-2010plus包装规格：1个其他参数：特殊部件，请咨询客服

供应商：岛津（上海）实验器材有限公司

更多产品规格与货号，请详询客服或致电咨询，谢谢！规格一：数量1 #tab_dj{background-color: #fff; border: 1px solid #e8e8eb; line-height:40px;} #tab_dj tr{background: #f5f5f5; text-align:center;}#tab_dj tr td{width:14%}货号：221-73340-42 货号：221-73340-42中文名：控制器英文名：APC-2010+,FTD使用机型：GC-2010plus包装规格：1个

供应商：岛津（上海）实验器材有限公司

更多产品规格与货号，请详询客服或致电咨询，谢谢！规格一：数量1 #tab_dj{background-color: #fff; border: 1px solid #e8e8eb; line-height:40px;} #tab_dj tr{background: #f5f5f5; text-align:center;}#tab_dj tr td{width:14%}货号：221-73342-41 货号：221-73342-41中文名：控制器英文名：APC-2010+,FPD+使用机型：GC-2010plus包装规格：1个其他参数：特殊部件，请咨询客服

供应商：岛津（上海）实验器材有限公司

更多产品规格与货号，请详询客服或致电咨询，谢谢！规格一：数量1 #tab_dj{background-color: #fff; border: 1px solid #e8e8eb; line-height:40px;} #tab_dj tr{background: #f5f5f5; text-align:center;}#tab_dj tr td{width:14%}货号：221-73340-41 货号：221-73340-41中文名：控制器英文名：APC-2010+, FID使用机型：GC-2010plus包装规格：1个