Caution:Do not place your finger over the vent(it pressurizes the sensor) to test the flow indicator when gas is flowing to the sensor.removing your finger (the restriction) generates a vacuum on the sensor and maydamage the sensor(voiding ... Caution:Do not place your finger over the vent(it pressurizes the sensor) to test the flow indicator when gas is flowing to the sensor.removing your finger (the restriction) generates a vacuum on the sensor and maydamage the sensor(voiding the sensor warraty).
Positive pressure applications:
If the sample pressure is greater than 30 psign an external pressure regulator(optional) is required upsteram of the analyzer to control of sample flow.a pressure regulator with a metallic diaphragm is recommended to prevent high oxygen reading that cuold result from the use of diaphragms constructed of more gas permeable materisls.
If other optionoal sample system components such as coiled metal tubing(samples must be colled to at least 35-40℃ for continuous use),coalescing filters ,scrubbers,etc.are required install the pressure rugulator after the coiled tubing and bofore the other components and the analyzer.a scrubber requires a flow valve upstream for optimum efficiency and response time and that the analyzer flow valve is opened completely.
Atmospheric or slightly negative pressure applications:
For accurate high ppb and/or low ppm range measurements,an optional simple pump is required downstream of the analyzer to draw the sample through the analyzer.The cacuum drawn on the analyzer and sensor should not exceed 4”of water.
Caution:Use ofpump downstream of the sensor requires the floe control valve upstream of the sensor be completely opened to avoid drawing ercessive vacuum in the sensor,which can damage the sensor.
If pump over-loading(due to the limitation of low flow rate of the sample gas)is a comsideration,a second throttle valve on the pump’s inlet side may be necessary to provide a bypass path,as illustrated below,to prevent the pump from over-loading and over-heating while miantaining the required sample flow rate within the above-mentioned parameters
检查部位:脊柱MR 检查项目:磁共振颅脑平扫磁共振颈椎平扫 检查参数: 头:TRA
请求项2记载の透明硬脆材料のレーザ加工装置において、前记半透过ミラー及び前记反射ミラーにおける凹面のそれぞ
农业食品 • 服装饰件 • 工艺品 • 汽摩及配件 • 箱包和礼盒 • 化工 •
前面介绍了,增量编码器码盘是由很多光栅刻线组成的,有两个(或4个,以后讨论4个光眼的)光眼读取A,B信号的,
Z好有商家专业销售 你可以选择尼康的测距仪望远镜 专业高尔夫专业应用 简单操作就能测量水平距离、高度
我想你要问的主要是传感方面的区别,拉曼光纤是一种测温模式,是一种分布式光纤测温模式,也就是说测试光纤的任何部
我到医院检查症状如下 主述:上腹不适,剑下疼。 检查所见: 1、胃底:粘膜光滑,可见散在斑片充血糜烂
UT302C红外测温仪 技术指标 基本功能 量程 温度范围 -32~650℃ 显示精度 ±1.8℃或
http://wenku.baidu.com/link?url=vU7q-lsCWcsPjMwIbxMy6t
cpu真正处理一个进程的时间,比如我们的cpu,当一个.exe程序需要处理时,不是一直占用cpu吧,我原来