产品中心

当前位置：首页>产品中心>Cole-Parmer Polystat Programmable Refrigerated Circulating Bath, -30°C, 20 L; 120 VAC

Cole-Parmer Polystat Programmable Refrigerated Circulating Bath, -30°C, 20 L; 120 VAC

品牌：Cole-Parmer
型号：
产地：美国
样册：暂无
供应商报价：面议

在线留言

收藏关注度： 89

详细介绍

Enhance your capabilities with an array of advanced programmable features

Intuitive touch-screen display accommodates user customization
Controller swivels to maximize visibility
Review temperature trends for up to 10 days
Schedule events by time and date with a real-time clock
Timer can be set from 0 to 999 minutes in 1-minute increments

规格与描述

储液槽容量 (L)20
最高温度 (° C)200
-20° C 条件下冷却能力 (W)165
0° C 条件下冷却能力 (W)505
20° C 条件下冷却能力 (W)915
最大流速 (L/min)20.1
最高泵压 (psi)4.3
最高泵压 (mbar)300
宽度 (in)16 19/32
长度 (in)24
高度 (in)26 29/32
宽度 (cm)41.9
长度 (cm)61
高度 (cm)68.3
加热器功率 (W)1100
功率 (VAC)120
功率 (A)13

包括

Pt100 external temperature probe, USB flash drive for data logging, stainless steel fittings and tubing adapters, virtual instrument software, resource disk with operator’s manual, reservoir cover, 6-ft / 1.82 m IEC to mains power cord, integral cooling coil, certificate of compliance and quick start guide

主要特点

Intuitive touch-screen display accommodates user customization
Controller swivels to maximize visibility
Review temperature trends for up to 10 days
Schedule events by time and date with a real-time clock
Timer can be set from 0 to 999 minutes in 1-minute increments
Minimum temperature of -30°C with a 20 L reservoir│Operates on 120 V

关于该商品的更多信息

With multiple selectable home screens and on-screen help. the touch-screen controller features icons (with accompanying plain text terms) for Settings, Safety, Connect, Program, Home, Control, Time and Service. These let you set the desired pump speed, temperature display resolution, auto restart, display filter and other variables. Customizable safety features include High/Low limit and High/Low alarms with auto shut down. You can also enable or disable the Local Lock Out; when enabled a password entry screen will appear if the operator attempts to change the set point or access the Main Menu.

Calibration parameters include Priority, which means programs can be run using either a Time- or Temperature-based priority; Loop, which sets the number of times the program will run through the programmed steps; and Soak Temperature, the temperature the bath should be maintained at once the final step has been completed.

Two USB ports enable data logging onto a flash drive, as well as the ability to monitor or control the circulator using a personal computer. The controller may also be directly connected to a laptop or desktop computer via its Ethernet connection (or via a wired or wireless network) to let you control or monitor the bath in real time over the internet. RS-232 and RS-485 communications are also supported.

The circulating bath tank is made of stainless steel while the deck is chemical resistant, easy to clean and accommodates probes from 2 to 8 mm in diameter. Bath complies with DIN 12876-1 Class III safety requirements for use with flammable liquids. Advanced PID algorithms increase heat responsiveness and eliminate set point overshoot.