Windowing mode

Imaging in a reduced window of interest for increased frame rates

Compatible with a variety of   framegrabbers

Several compatible frame grabbers for CameraLink interface are available

High resolution

640x512 pixel resolution

High sensitivity

Low noise equivalent temperature difference (NETD)

High speed

High frame rate imaging at 250 fps in full frame

XIE

Xenics Image Enhancement for improved image quality in low contrast   situations

Detector type

MCT

InSb

Spectral range

3.7 μm to 4.8 μm

1.5 - 6 µm

3.6 μm to 4.9 μm

1.5 - 5.4 µm

Image format

640 (w) x 512 (h) pixels

Pixel pitch

15 μm

Array cooling

Stirling cooled

Detector NETD (Noise Equivalent   Temperature Difference)

< 25 mK

Gain modes

1 gain mode

HG & HDR mode

Analog-to-Digital (ADC)

NA

13-14-15 bit selectable

Pixel operability

> 99.5 %

F/#

F/3

Lens

LWIR 18 mm F/1

Optical interface

Bayonet

Imaging performance

Maximum frame rate (full frame)

117 Hz

357 Hz

Min region size

Minimum size 144 x 64

Minimum size 64 x 64

On-board image processing

Non-Uniformity Correction (NUC), Bad   Pixel Replacement, Auto-Gain & Auto-Offset, XIE

Interfaces

Command and control

CameraLink and GigE Vision

Image acquisition

CameraLink, GigE Vision, HD-SDI and   Analog (PAL/NTSC)

Trigger

Trigger in or out (configurable)

Power requirements

Power consumption

25 W

Power supply

24 V

Physical characteristics

Camera cooling

Forced convection cooling

Ambient operating temperature range

-40ºC to 60ºC

Dimensions (width x height x length) -   excluding lens (approximately)

100 x 149 x 200 mm

Weight (excluding lens)

3.5 kg

Filter wheel options

Start - stop mode

# filters

Up to 5 filters, 25.4 mm diameter, 1.0   mm thickness