Stainless-Steel Pipet Washers

Pipet Washer

• Uses intermittent siphon to set up turbulent “fill-and-empty” action to wash away dirt and grime from serological and other pipets
• Water inlet above chamber creates air gap to prevent backflow of contaminated contents into water supply in case of sudden system-pressure loss
• Hot or cold water enters bottom of washer through 0.5 in. (1.3cm) IPS inlet; drains through 1 in. (2.5cm) IPS outlet at base

• Includes 195w immersion heating unit to dry pipets in one hour
• When washing and rinsing are completed, water supply is turned off and heated air circulates through cylinder