Thorlabs 光功率和能量计表头 投射电容式触摸屏 型号PM400
Thorlabs 触屏功率能量计表头,多点触控技术
Thorlabs S132C - 超薄光电二极管功率探头
Thorlabs 功率计表头,带USB、 RS232、UART接口,模拟操作
Thorlabs 紧凑型光纤光电二极管功率探头
小型手持式功率和能量计表头
4英寸大屏LCD显示
内置长寿命锂电池
预装8 GB SD卡用于数据存储
表头经校准且包含校准证书
请注意,PM100D表头不包含探头。请在下方的探头页面中查看探头兼容信息。但是Thorlabs提供各种功率计套件,将PM100D表头和我们受欢迎的探头捆绑销售。详情请访问我们的功率计套件页面。
Thorlabs提供PM100D的重新校准服务,可在下方订购(型号CAL-PM1或CAL-PM1D)。另外,如果您有需要重新校准的对应的探头,也可以将PM100D和探头一起进行工厂重新校准,无需额外的费用。如需订购此服务,请看本页底部,根据您的探头选择合适的型号。
规格
| Table 2.1 Specifications | |
|---|---|
| Item # | PM100D |
| Display | |
| Display Type | Graphical LCD 320 x 240 pixels, LED Backlight |
| Display Screens | Numerical, Bar Graph, Line Graph, Statistics, Simulated Analog Needle |
| Viewing Area | 81.4 mm x 61.0 mm (3.20" x 2.40") |
| Refresh Rate | 20 Hz |
| Audio | 1x Speaker |
| Sensor Interface | |
| Compatible Sensors | All Photodiodes, Thermopiles, and Pyrosa See Below for Full Sensor Specs |
| Time Constant Correction | < 1 s |
| AD Converter | 16 bit |
| Trigger (Pulse Measurements, Pyroelectric Sensors) | Adjustable, 0.1 - 100% |
| Connector | DB9F, Left Side |
| Sensor Temperature Control | Thermistor |
| Temperature Range | -10 to 80 °C |
| Analog Outputs | |
| Signal | Amplified Input Signal (Not Corrected) |
| Voltage Range | 0 to 2 V |
| Accuracy | ±3% |
| Bandwidth | Up to 100 kHz, Dependent on Sensor and Settings |
| Connector | SMA, Left Side |
| Digital Outputs | |
| Memory | 8 GB Removable SD Card |
| Connector / Interface | Mini USB / USB 2.0 |
| Power | |
| Battery | Li-Polymer, 3.7 V, 1300 mAh |
| Charger / DC Input | 5 V / 1 A |
| Dimensions and Mounting | |
| Dimensions (L x W x H) | 180 mm x 105 mm x 38 mm (7.09" x 4.13" x 1.50") |
| Weight | < 0.5 kg (< 1.1 lb) |
| Mounting Options | Kickstand; 1/4"-20 Post Thread |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -40 to 70 °C |
除了ES408C高速热释电能量探头
探头兼容规格
| Table 2.2 Sensor Compatibility Specs | |||
|---|---|---|---|
| Item # | PM100D | ||
| Detector Compatibility | Photodiode Sensors: S1xxC Series Photodiodes (Max 5 mA) | Thermal Sensors: S3xxC Series Thermopiles (Max 1 V) | Pyroelectric Sensors: ESxxxC Series Pyros (Max 100 V)a |
| Measurement Ranges | 6 Decades; 50 nA - 5 mA Ranges Selectable in W or A, Sensor Dependent | 4 Decades; 1 mV - 1 V Ranges Selectable in W or V, Sensor Dependent | 4 Decades; 100 mV - 100 V Ranges Selectable in J or V, Sensor Dependent |
| Wavelength Ranges | 200 nm - 1800 nm (Sensor Dependent) | 190 nm - 25 μm (Sensor Dependent) | 185 nm - 25 μm (Sensor Dependent) |
| Power / Energy Ranges | 100 pW - 20 W | 100 μW - 200 W | 10 μJ - 15 J |
| Units | W, dBm, W/cm2, A | W, dBm, W/cm2, V | J, J/cm2, W, W/cm2, V |
| Accuracy | ±0.2% of Full Scale (5 µA - 5 mA) | ±0.5% of Full Scale (10 mV - 1 V) ±1% of Full Scale (1 mV) | ±0.5% of Full Scale (100 mV - 100 V) |
| Display Resolution | 1 pA / Responsivity Value (A/W) | 1 µV / Responsivity Value (V/W) | 100 µV / Responsivity Value (V/J) |
| Bandwidth | DC - 100 kHz, Dependent on Sensor and Settings | DC - 10 Hz, Dependent on Sensor and Settings | N/A |
| Max Repetition Rate | N/A | N/A | 3 kHz |
| Wavelength Correction | Sensor Dependent; nm (A/W) | Sensor Dependent; nm, (V/W) | Sensor Dependent; nm, (V/J) |
由于此表头只能支持*高3 kHz重复频率,因此它不应与可探测高达10 kHz重复频率的ES408C探头一起使用。
关于探头规格的全部列表,请参见光电二极管功率探头,热功率探头或热释电能量探头网页。关于其他信息,请联系技术支持。
报价:面议
已咨询154次激光功率计
报价:面议
已咨询514次功率计
报价:面议
已咨询34次激光功率计
报价:面议
已咨询52次激光功率计
报价:面议
已咨询2404次激光能量计
报价:面议
已咨询310次激光功率计
报价:面议
已咨询955次功率计
报价:面议
已咨询348次功率/能量/波长计
低噪声激光二极管驱动器,电流高达1 A 两个集成式TEC控制器,电流高达3.5 A 20 MHz交流电流调制频率范围
前面板速度轮和数字显示器用于控制电动位移台或驱动器 两个双向触发端口用于读取或控制外部设备 使用附带的USB电缆与计算机通讯 完全兼容Kinesis和XA软件 紧凑型尺寸:60.0 mm x 60.0 mm x 49.2 mm 不包含电源(见下方)
通用光功率测量 集成观察卡便于探头对准 探头孔径为Ø9.5 mm 光纤转接件可单独购买(见表G1.2) 包含探头、保护盖、红外观察卡和螺纹转接件
测量不受光束形状和入射角影响 积分球作为漫射体,功率损耗极小 Ø5 mm、Ø7 mm、Ø12 mm或Ø22 mm输入孔径 孔径≤Ø12 mm的积分球包含可拆卸的S120-FC光纤转接件(FC/PC和FC/APC) 提供用于接头光纤和裸纤的光纤转接件(见表G5.4),兼容孔径≤Ø12 mm的积分球
这些热敏功率探头适用于中低功率光源的一般宽带功率测量。它们都包含一个SM1(1.035"-40)外螺纹转接件,螺纹与入射孔径同心。
光功率分辨率:100 µW 利用热敏电阻监测探头温度 附带可拆卸的散热器
测量不受光束形状和入射角影响 积分球作为漫射体,功率损耗极小 Ø5 mm、Ø7 mm、Ø12 mm或Ø22 mm输入孔径 孔径≤Ø12 mm的积分球包含可拆卸的S120-FC光纤转接件(FC/PC和FC/APC) 提供用于接头光纤和裸纤的光纤转接件(见表G5.4),兼容孔径≤Ø12 mm的积分球