分享 收藏

德国莱驰行星式球磨仪 PM 100 CM

品牌：德国莱驰
型号： PM 100 CM
产地：欧洲德国
供应商报价：面议

弗尔德（上海）仪器设备有限公司更新时间：2025-02-20 15:05:07

销售范围售全国

入驻年限第10年

营业执照已审核

同类产品粉碎机、研磨机、球磨机(40件)

立即扫码咨询

联系方式：021-87654090

联系我们时请说明在仪器网（www.yiqi.com）上看到的!

扫码分享

为您推荐

产品特点

详细介绍

产品介绍：

The Planetary Ball Mill PM 100 CM is a powerful benchtop model with a single grinding station and an easy-to-use counterweight which compensates masses up to 8 kg. It allows for grinding up to 220 ml sample material per batch.

The extremely high centrifugal forces of Planetary Ball Mills result in very high pulverization energy and therefore short grinding times.

The PM 100 CM operates in centrifugal mode which leads to a more gentle size reduction process with less abrasion.

The mill can be found in virtually all industries where the quality control process places the highest demands on purity, speed, fineness and reproducibility.

It is ideally suited for research applications or ultrafine colloidal grinding, as well as for routine tasks such as mixing and homogenizing soft, hard, brittle or fibrous materials.

FAST & POWERFUL

Loss-free size reduction down to the submicron range
Wet grinding yields particle sizes in the nanometer range (<100 nm)
Variable speed from 100 to 650 rpm,
speed ratio 1:-1
Grinding with up to 33.3 x acceleration of gravity
Batch-wise processing with max. 1 x 220 ml sample
2 x 20 ml sample per batch with stacked jars

行星式球磨仪 PM 100 CMREPRODUCIBILITY, SAFETY AND EASY HANDLING

Reproducible results due to speed control
Easy and safe clamping of grinding jars
The Safety Slider prevents starting the machine without securely clamped jars
Perfect stability on the lab bench thanks to FFCS technology
Innovative counterweight and imbalance sensor for unsupervised operation
Comfortable parameter setting via display and ergonomic 1-button operation
Automatic grinding chamber ventilation
10 SOPs can be stored, programmable starting time
Power failure backup ensures storage of remaining processing time

SETTINGS & OPTIONS

Dry and wet grinding possible
Suitable for long-term trials, 99:59:59 h max.
Interval operation allows for cooling breaks
Direction reversal helps to minimize caking effects

行星式球磨仪 PM 100 CMWET GRINDING WITH THE PM 100 CM

Wet grinding is used to obtain particle sizes below 5 µm, as small particles tend to get charged on their surfaces and agglomerate, which makes further grinding in dry mode difficult. By adding a liquid or dispersant the particles can be kept separated.

To produce very fine particles below 1 micron by wet grinding, friction rather than impact is required. This is achieved by using a large number of small grinding balls which have a large surface and many friction points. The ideal filling level of the grinding jar should consist of 60 % small grinding balls.

For more details on jar filling, wet grinding and sample recovery click here.

The graphic shows the result of grinding zeolite microparticles at 600 rpm in the PM 100 CM. After 1.5 h of pulverization in isopropyl alcohol with 0.5 mm grinding balls, the D90 value of the original sample was reduced from 25 µm to 350 nm.

行星式球磨仪 PM 100 CM"COMFORT" GRINDING JARS FOR EXCELLENT RESULTS

The performance and the result of sample preparation are also determined by the choice of the grinding jar and its ball charge. The comfort range of grinding jars has been specially designed for extreme working conditions such as long-term trials, wet grinding, high mechanical loads and maximum speeds as well as for mechanical alloying.

Available jar sizes: 12 ml / 25 ml / 50 ml / 80 ml / 125 ml / 250 ml / 500 ml
Pressure-tight and dust-proof O-ring sealing prevents material spillage, even after clamping is released
Jars and balls available in 7 materials: hardened steel, stainless steel, tungsten carbide, agate, sintered aluminium oxide, silicon nitride, zirconium oxide
Stainless steel protective jacket for agate, sintered aluminum oxide, zirconium oxide and tungsten carbide grinding jars
A groove between jar body and lid allows for easy opening of the lid, e. g. with the help of a spatula, if there are underpressure effects inside the jar

JARS & LIDS FOR SPECIAL APPLICATIONS

For colloidal or wet grinding, the use of a grinding jar with a special closure device is recommended
Aeration lids are designed for working under inert atmosphere, for example if oxygen can influence the grinding process or the mechanosynthesis. The lids allow the introduction of gases like argon or nitrogen into the grinding jar.
Optional pressure and temperature measuring system PM GrindControl

行星式球磨仪 PM 100 CMRECOMMENDED JAR FILLINGS

To produce optimum grinding results, the jar size should be adapted to the sample amount to be processed. The grinding balls are ideally sized 3 times bigger than the largest sample piece. Following this rule of thumb, the number of grinding balls for each ball size and jar volume is indicated in the table below. To pulverize, for example, 200 ml of a sample consisting of 7 mm particles, a 500 ml jar and grinding balls sized at least 20 mm or larger are recommended. According to the table, 25 grinding balls are required.

Grinding jar nominal volume	Sample amount	Max. feed size	Recommended ball charge (pieces)
Grinding jar nominal volume	Sample amount	Max. feed size	Ø 5 mm	Ø 7 mm	Ø 10 mm	Ø 15 mm	Ø 20 mm	Ø 30 mm	Ø 40 mm
12 ml	直至 5 ml	<1 mm	50	15	5	-	-	-	-
25 ml	直至 10 ml	<1 mm	100	25	8	-	-	-	-
50 ml	5 – 20 ml	<3 mm	200	45	10	7	3	-	-
80 ml	10 – 35 ml	<4 mm	250	70	25	10	5	-	-
125 ml	15 – 50 ml	<4 mm	500	110	30	18	7	-	-
250 ml	25 – 120 ml	<6 mm	1200	220	50	45	15	6	-
500 ml	75 – 220 ml	<10 mm	2000	440	100	70	25	8	4

The table shows the recommended charges (in pieces) of differently sized grinding balls in relation to the grinding jar volume, sample amount and maximum feed size.

行星式球磨仪 PM 100 CM典型樣品材料

RETSCH planetary ball mills are perfectly suitable for size reduction of, for example, alloys, bentonite, bones, carbon fibres, catalysts, cellulose, cement clinker, ceramics, charcoal, chemical products, clay minerals, coal, coke, compost, concrete, electronic scrap, fibres, glass, gypsum, hair, hydroxyapatite, iron ore, kaolin, limestone, metal oxides, minerals, ores, paints and lacquers, paper, pigments, plant materials, polymers, quartz, seeds, semi-precious stones, sewage sludge, slag, soils, tissue, tobacco, waste samples, wood, etc.

行星式球磨仪 PM 100 CM技术参数

应用	粉碎、混合、均化、胶体研磨
应用领域	农业, 化学, 医药, 地质/冶金, 工程/电子, 建筑材料, 环境/循环, 玻璃/陶瓷, 生物
样品特征	软性, 硬性, 脆性, 纤维质—干或湿
粉碎原理：	撞击力，摩擦力
最大进样尺寸	< 10 mm
最终出料粒度 *	用于胶体研磨，出样小于０.１微米
批次加料量*	最大 1 x 220 毫升使用堆叠管时：最大 2 x 20 毫升
研磨平台数 (可接纳研磨罐数)	1
转速比设定	1:-1
太阳轮转速	100 - 650 min-1
有效太阳轮直径	141 mm
重力	33.3 g
研磨罐种类	"舒适型", 安全紧固装置
研磨套件材料：	硬质刚, 不锈钢, 碳化钨, 玛瑙, 烧结刚玉, 氮化硅, 氧化锆
研磨罐尺寸	12 ml / 25 ml / 50 ml / 80 ml / 125 ml / 250 ml / 500 ml
粉碎时间设定	数字设定 00:00:01 至 99:59:59
间歇驱动	可以，反向转动
转动时间	数字设定 00:00:01 至 99:59:59
暂停时间	数字设定 00:00:01 至 99:59:59
可存储运行模式	10
串行接口	RS 232 / RS 485
驱动	带变频器的三相交流电动机
驱动功率	750瓦
电源数据：	不同电压
电源接头：	单相
防护类型	IP 30
接受功率	~ 1250W (VA)
机体尺寸（宽x高x纵深）	640 x 480 (780) x 420 mm
净重	~ 86 kg
标准	CE
专利/实用专利	配重（DE 20307741），FFCS（DE 20310654），安全滑块（DE 202008008473）。

受样品材料性质和仪器配置/设定的影响

行星式球磨仪 PM 100 CM

作用原理

行星式球磨仪的研磨罐位于底部太阳轮的偏心位置。研磨罐绕轴自转，与公共的太阳轮转动方向正好想法，太阳轮与研磨罐的转速比为1：-1。研磨罐中的球在于研磨罐一起运动时受到Coriolis力（即自转偏向力）的叠加影响。研磨罐和研磨球的运动速度之差产生强摩擦力和撞击力，因而释放了大量的动能。这种撞击和摩擦的组合使得行星式球磨仪研磨时的粉碎度及高。为了保持运动时的平衡，拥有一个研磨工位的行星式球磨仪需要配重。PM100CM型行星式球磨仪的配重可在一条倾斜的导轨上调整。不同大小的研磨罐的不同重心高度由此得到精确的补偿，从而避免了仪器运行时的晃动和振荡。剩余的振动可以通过仪器底座的微小自由运动（底座自由力补偿）得到补偿。这种新型的FFCS技术基于d’Alembert原理，允许机身作很小的回旋运动，自动完成质量补偿。实验桌面只受到仪器底座产生的微小摩擦力。 PM100CM型行星式球磨仪运行时安静、安全，即使在罐内振动达到最大时仍能保证最优的振动补偿，因此可置于实验室桌面，无需监护。