微电极放大器,是高增益AC/DC微分放大器,可用于低噪声的可兴奋组织的细胞外记录、EEG、EKG等记录。
Model 3000型产品主要特点及参数:
· 单道交流放大器
· 选择Stimulus模式,外部刺激器可输入刺激信号
· Recording模式和Stimulus模式都可通过计算机控制
· 输入阻抗:1015Ω
· 增益:50-10,000
· 电容补偿:4-50pF
· 具有低通、高通滤波和带阻滤波
· 直流失调电位补偿:±250mV
· 体积小,可放置于屏蔽网内
· 噪声:1.8µV, p-p(10Hz-10kHz); 0.1fA/Hz
根据需求,还有其他多个型号可供选择:
Model 1800型 微电极放大器产品主要特点及参数:
· 2道交流放大器,相当于2台放大器
· 探头适用于高阻抗玻璃或金属电极的细胞外记录和刺激
· 低噪声:1.0μV(peak-peak)
· 输入阻抗:1011Ω
· 增益:100、1,000、10,000
· 具有低通、高通滤波以及50/60Hz带阻滤波
· 电压输出范围:±8V
Model 1700型 微电极放大器产品主要特点及参数:
· 4道微分交流放大器,相当于4台放大器
· 低噪声:1.0μV(peak-peak)
· 输入阻抗:1011Ω
· 增益:100、1,000、10,000
· 具有低通、高通滤波以及50/60Hz带阻滤波
· 电压输出范围:±8V
Model 3500型 微电极放大器产品主要特点及参数:
· 13 gain settings from x2 to x20,000
· 8 high-pass filter settings from 0.3 Hz to 500 Hz
· 8 low-pass filter settings from 100 Hz to 20.0 kHz
· TTL Control of instrument mode
· Twin stimulation busses to pass current
· Channel Monitors
· Built-In Calibration signal
· Common Reference Bus
· Blanking
· PC control capability
· MATLAB® and LabVIEW SDK and drivers available
· 3U rackmount enclosure accommodates all 16 channels
The Model 3500 is supplied with optional Windows control software. This software controls all features of the amplifier via a USB port (cable included).
The program also enables the storage of an unlimited number of 16-Channel parameter files, as well as provides a real-time notepad that logs changes in parameter settings or experimenter-added notations.
Model 3600型 微电极放大器产品主要特点及参数:
· 11 gain settings from x2 to x20,000
· 8 high-pass filter settings from 0.3 Hz to 500 Hz
· 8 low-pass filter settings from 100 Hz to 20.0 kHz
· TTL Control of instrument mode
· Channel Monitors
· Built-In Calibration signal
· Common Reference Bus
· Blanking
· PC control capability
· MATLAB® and LabVIEW SDK and drivers available
· 3U rackmount enclosure accommodates all 16 channels
Headstages for Model 3600 16-Channel Amplifier
For simultaneous stimulation and recording on any combination (or all) of the 16 channels when paired with our Model 3600 Amplifier. Capped in the Omnetics Corporation nanominiature connectors, we can provide adapters for use with other electrode configurations, including the Michigan Probe. This headstage uses fast switching relays (microsecond switching times, not milliseconds!) to control signal paths between stimulating and recording modes.
Includes built-in recording output cable. Optional Stimulation control cable (#962050) is required to operate stimulation functions. Max current is 20 mA, with a ±10V voltage range.

16-Channel Record-Only Headstage
Microminiature x20 headstage with 16 amplified channels and an amplified reference electrode channel. The entire headstage is roughly the size of a penny, and features 0.025" connector spacing using Omnetics Corporation nanominiature connectors.
Does not include a recording output cable. Order #961150 Output Cable.
Input options include direct connections to electrodes or to a connector with small input leads (Product 963000). Adapters are available for the "Michigan Probe DIP electrode (Product 963200) or a larger pin connector (Product 963100). Please contact us for details.
Model 3600 Control Software
The Model 3600 is supplied with optional Windows control software. This software controls all features of the amplifier via a USB port (cable included).The program also enables the storage of an unlimited number of 16-Channel parameter files, as well as provides a real-time notepad that logs changes in parameter settings or experimenter-added notations.
根据需求,还可以选择MODEL 4000来记录更多通道:
Stuck at 2 channels, when you want to record more then 30? Or perhaps you want to record up to 217 Channels from an awake behaving animal, but can't afford the design, engineering, and production of a custom commutator to allow it?
Now you can record what you want as much as you want! With the new MultiRecord System!
Utilize a simple commutator to record high channel counts:
31 Channels over a 3-line commutator
62 channels over a 4 line commutator
124 channels over a 6-line commutator
您想了解更多详细资料吗?
请与我们联系:
TEL:021-35183767,021-54377179
18502129044
QQ:3007536035
微信:yuyanbio
Mail:yuyanbio@126.com
欢迎您的咨询!
报价:面议
已咨询283次生理信号测量
报价:面议
已咨询596次电生理实验系统
报价:面议
已咨询59次实验室仪器
报价:¥7000
已咨询846次传感器
报价:面议
已咨询38次实验室仪器
报价:面议
已咨询400次手术及辅助设备
报价:面议
已咨询263次细胞培养及分析设备
报价:面议
已咨询1686次
带宽:(-3dB)DC~10kHz 电压:4kVp-p(±2kVp) 电流:20mAp 功率:40Wp 压摆率:≥90V/μs 应用:材料极化、介电弹性体、等离子体、静电偏转、电流体打印、高压电缆测试、电子照相、激光调制
带宽:(-3dB)DC~5kHz 电压:10kVp-p(±5kVp) 电流:10mAp 功率:50Wp 压摆率:≥111V/μs 应用:材料极化、介电弹性体、等离子体、静电偏转、电流体打印、高压电缆测试、电子照相、激光调制
带宽:(-3dB)DC~500kHz 电压:310Vp-p(±155Vp) 电流:3.53Ap 功率:547.1Wp 压摆率:345V/μs 应用:超声电机驱动、软磁测试、无损检测、磁芯损耗测试、驱动压电陶瓷、超声换能器
BLWA 0830固态放大器面向未来的现代化测试设备EMC传导测试仪t;系统集成; 德国BONN Elektronik 公司成立于1975年,一直从事于射频模块和系统的设计和生产工作,目前是欧洲的射频生产商。
Optoplex设计并生产了高功率单模和保偏EDFA,满足MSA兼容要求。输出功率为+23 dBm的C波段MSA EDFA模块是Optoplex标准产品。Optoplex设计的前置EDFA在-40dBm输入功率下提供超过35dB的增益。双包层泵浦EDFA产生2W输出功率。 下面显示了流行的MSA EDFA配置。
电流/电压功放。扩展常规电化学工作站槽压,针对CO2还原等电催化实验应用。