德国Liebisch KB 300 A 300L冷凝水+SO2+自动通风三合一腐蚀试验箱
德国Liebisch KB 300 A 300L冷凝水+SO2+自动通风三合一腐蚀试验箱
德国Liebisch KB 300 A 300L冷凝水+SO2+自动通风三合一腐蚀试验箱
德国Liebisch KB 300 A 300L冷凝水+SO2+自动通风三合一腐蚀试验箱
德国Liebisch KB 300 A 300L冷凝水+SO2+自动通风三合一腐蚀试验箱
德国Liebisch K3000M-TR 冷凝水腐蚀试验箱特点:
型号 K 3000 M-TR
Operating systems: condensation water (K) 功能:冷凝水(K)
To carry out automatic PID controlled individual in accordance with national and international standards and procedures such as:
可以通过 PID 控制分别进行国家和标准的试验程序,例如
DIN EN ISO 6270-2(formerly DIN 50017 )
⚫ Particularly energy-saving, heat-insulated compact chest-type design Housing and testing chamber made of high-quality glass-fibre reinforced polyester resin on fully laminated steel frame with castors and adjustable feet
特制的节能、隔热紧凑型箱体设计,内置加强钢架的高品质玻璃纤维复合材料,标配脚轮
和可调节地脚螺钉;
⚫ Double-wall energy-saving testing chamber cover (particularly torsion-resistant and providing insulation)
双层节能箱盖设计 (特制防扭力、隔热 )
⚫ Easy handling due to double gas strut support and ergonomically formed handle 方便的双气压支撑杆,人体工学设计把手;
⚫ Testing chamber volume approx. 3000 litre 试验容积大约 3000 升;
⚫ Testing chamber seals made of foam silicone profiles 硅树脂发泡密封
⚫ Sample depot made of fully non-corrosive and deflection-resistant glass-fibre reinforced plastic round tubes
全防腐、防变形玻璃纤维加强型圆杆样品架;
⚫ Automatic refill system for deionized water to supply operating water for condensation test.(Required flow pressure of deionized water: 0,5 - 1 bar)
冷凝水试验去离子水自动上水系统 ( 需要去离子水压:0,5 - 1 bar )
⚫ Large-surface heating on the outer down sides of the testing chamber protected against corrosion for constant heating
箱体外下部的大加热面积设计,防止长时间加热状态的腐蚀;
⚫ Electronic micro-processor controlled temperature control (PID) of testing chamber 试验 PID 温度控制
⚫ LED-Display resolution of set and actual value 0,1°C. Temperature constancy <± 0,5 K. LED 显示设定和实际温度分辨率 0,1°C,温度波动小于±0,5 K;
The chest is supplied fully equipped and ready for connection. The standard delivery scope includes: 3 m mist drainage hose d 50, 3 m safety overflow hose d 50, 2 m condensate drainage hose d 20
设备附件齐全,易于现场安装。标准配置包括:3m 长 d50 喷雾排气管,3m 长 d50 溢流水管,2m 长 d32 排水管。

德国Liebisch K3000M-TR 冷凝水腐蚀试验箱主要参数:
Type 类型 | K 3000 M-TR |
Housing 箱体 | GRP |
Weight 重量 | appr. 800 kg |
Cabinet dimensions (b x d x h) 箱体尺寸 | 3925x 1350 x 1520 mm |
Inside dimensions (b x d x h) 内部尺寸 | 2865 x 1020 x 1200 |
Max. loading testing chamber (possibly on bored basic plate / option)底板承重 | 200 kg |
Operating voltage / Frequency 工作电压/频率 | AC 400 V +6/-10% 50/ 60 Hz |
Connected load K 功率 | 3.500 W |
Control range test room K 温度控制范围 | up to 50°C |
Fuse 保险 | 12A |
Temperature control 温度控制 | el. PID |
Overtemperature protection for test room 过温保护 | yes |
Volumen test chamber 试验容积 | 3000 litre |
Pressure requirement of external demin. water supply 外部去离子水压 | 0,5 - 1,0 bar |
Water filling housing bottom 底部水容积 | 28 litre |
Exhaust-air hose (diameter) 排气孔直径 | d 50 mm (hose) * |
Condensate draining hose (diameter) 冷凝水排水孔直径 | d 32 mm (hose) * |
Safety overflow hose (diameter) 溢水孔直径 | d 50 mm (hose) * |
Technical changes possible. 保留技术改动权利 * hose is included in delivery 水管标配

报价:面议
已咨询411次恒温恒湿箱
报价:面议
已咨询513次恒温恒湿箱
报价:面议
已咨询480次恒温恒湿箱
报价:面议
已咨询476次恒温恒湿箱
ASTM D624 是测定硫化橡胶与热塑性弹性体撕裂强度的核心标准,定义了 A、B、C 三类主流裁切刀(另有 T/CP 等特殊类型),三款裁刀在试样形态、适用场景及结构设计上差异显著,以下为详细参数与应用要点。
取样方向:D1004 需区分机器方向(MD)与横向(TD),两种方向各至少测试 10 个试样;D624-C 按标准方向取样即可。 精度要求:裁刀尺寸公差需严格符合标准,D1004 裁刀尺寸偏差不得超过 0.5%。
蛛网流动实验,又称蜘蛛模具测试(Spider Mold Test),是一种专门用于评估未硫化橡胶混炼胶在复杂流道下流动与填充能力的定性与半定量方法。它通过模拟多支路分流汇流的流场,直观判断胶料的流动性、分散均匀性及硫化特性,广泛应用于配方研发、工艺优化与质量控制。
GB/T 528-3 型是国标小尺寸、中窄平行段哑铃裁刀,专为材料不足、小样品、薄 / 中厚橡胶的拉伸试样制备设计,是实验室与质检常用的紧凑型裁刀。
GB/T 528-4 与 DIN 53504 S3A 详细介绍 两者均为橡胶拉伸试样的标准哑铃裁刀 / 刀模,分别对应国标与德标体系,核心用于制备拉伸试样以测定橡胶 / 弹性体的拉伸强度、断裂伸长率、定伸应力等力学性能。
GB/T 528-1A 型(常写 1A 型 /ⅠA 型)是国标专用短标距、窄平行段裁刀,专为中等厚度橡胶、线缆护套、中等硬度弹性体的拉伸试样制备设计,是实验室与质检常用的标准裁刀之一。
GB/T 528-2 型裁刀(等同 ISO 37 Type 2)是薄型橡胶、电线电缆绝缘层、软质薄膜专用的标准哑铃裁刀,专为小尺寸、薄试样设计,是实验室与质检高频使用的小型裁刀。
GB/T 528 现行最新版为 GB/T 528-2009《硫化橡胶或热塑性橡胶 拉伸应力应变性能的测定》,等同采用 ISO 37:2005