S9106A 5G Multiband Vector TransceiverZL

深圳市达瑞博电子有限公司长期出售及租赁进口二手仪器仪表：网络分析仪、频谱分析仪、信号发生器、示波器、天馈线测试仪、多功能校准器/传感器模块、手机综合测试仪、噪声系数分析仪、NI-GPIB卡、阻抗/LCR测试仪、音频分析仪、蓝牙测试仪、功率计、放大器、万用表等各类仪器仪表。

   经营品牌:安捷伦Agilent（Keysight）、R&S罗德与施瓦茨、Tektronix泰克、Anritsu安立、SPIRENT思博伦、Giga-tronics、Advantest爱德万、Aeroflex艾法斯、IFR、韩国兴仓PROTEK、JDSU真康、FUJITSU 富士通、SUNGSAN、TESCOM泰仕康、Keithley吉时利、Fluke福禄克、LitePoint莱特波特等。
 联系电话：
 张  梁：18938937317  
 廖先生：13421364554

S9106A 5G Multiband Vector Transceiver

Discover a streamlined, non-signaling, up to 4x4 MIMO measurement system

The Keysight S9106A 5G multiband vector transceiver offers lower test costs and a reduced footprint for your multiple-input / multiple-output (MIMO) test bench compared to benchtop instruments. This solution enables you to effectively test 5G New Radio (NR) network equipment and radio components from product development and design validation test (DVT) to manufacturing. This platform provides superior performance with a bandwidth of 1.2 GHz per channel for both signal generation and signal analysis, and up to +20 dBm output power.

Choose from the following three standard configurations that best fit your application needs:

• S9106A-2IF: FR1 – Two transceiver channels, 380 MHz – 6 GHz with MIMO, and DUT IF 7 – 15 GHz-enabled

• Use the dual-channel base system covering 5G FR1 (sub-6 GHz) frequency range.

• Explore the included Keysight E7770A common interface unit (CIU) that provides up / down conversion of the signals.

• Employ the 2 x 2 MIMO at both RF and IF frequencies.

• Apply a signal bandwidth of 1.2 GHz for both signal generation and signal analysis.

• Discover how each channel provides a high output power at +20 dBm (settable up to +25 dBm) and a half-duplex port.

• 
  

• S9106A-4UP: FR1 – Four transceiver channels, 380 MHz – 6 GHz with MIMO

• Use the four-channel base system covering 5G FR1 (sub-6 GHz) frequency range.

• Employ each channel independently or set up for 4 x 4 MIMO.
  

• Apply a signal bandwidth of 1.2 GHz for both signal generation and signal analysis.
  

• Discover how each channel provides a high output power at +20 dBm (settable up to +25 dBm) and a half-duplex port.

• 
  

• S9106A-42D: FR1 – Four transceiver channels, 380 MHz – 6 GHz with MIMO, and DUT IF 7 – 15 GHz on two channels

• Use the four-channel base system covering 5G FR1 (sub-6 GHz) frequency range.

• Get the included E7770A common interface unit (CIU) that provides up / down conversion of the signals from the base system to the 7 to 15 GHz frequency range for IF testing.

• Employ each channel independently or set up for 4 x 4 MIMO.

• Apply a signal bandwidth of 1.2 GHz for both signal generation and signal analysis.

• Discover how each channel provides a high output power at +20 dBm (settable up to +25 dBm) and a half-duplex port.

• 
  

温馨提示：

     本产品上标的价格只是参考价格，因为市场价格影响波动大，所以价格也会有影响，具体价格还请联系客服，请勿直接下单，谢谢合作！

   如有需要，欢迎随时联系我们，谢谢！