ChemTron NR-3000中低压反应釜套装

中低压反应釜套装 NR-3000

釜体单层结构无底阀( 可以带内衬)

5830050

NR-3000

反应釜套装

SS

NR-3000 Set of basic reactor made of SS  316TI , volume 3500mL for usage with or without PTFE-lining.Includes reactor  vessel with lid made of SS 316TI, O-seal ring (FPM,143x4,0mm),  manualquick-lock closure ring, standard fittings( rupture disc made of Monel,  25bar, with rupture disc holder and vent valve,nominal width 4mm), two  handles and connection ports for heating/coo领 coil (2x 6mm connections),  magnetic clutch RV-100 (1x M30 connection) as well as two 8mm swagelok  connections.

釜体单层结构带底阀( 无内衬)

5830055

NR-3000

反应釜套装

SS BV

NR-3000 Set of basic reactor made of SS  316TI , volume 3500mL for usage with bottom drain valve.Includes reactor  vessel with lid made of SS 316TI, O-seal ring (FPM,143x4,0mm), manual  quick-lock closure ring, standard fittings( rupture disc made of Monel,  25bar, with rupture disc holder and vent valve,nominal width 4mm), two  handles and connection ports for heating/coo领 coil (2x 6mm connections),  magnetic clutch RV-100 (1x M30 connection),bottom drain valve as well as two  8mm swagelok connections.

釜体夹套结构无底阀( 可以带内衬)

5830060

NR-3000

反应釜套装

SS J

NR-3000 Set of basic reactor made of SS  316TI with jacket, volume 3500mL for usage with or without  PTFE-lining.Includes reactor vessel with welded-on and isolated jacket for  heating/coo领 with circulation heater/cooler, lid made of SS 316TI, O-seal  ring (FPM,143x4,0mm), manual quicklock closure ring, standard fittings(  rupture disc made of Monel, 25bar, with rupture disc holder and vent  valve,nominal width 4mm), two handles and connection ports for  heating/coo领 coil (2x 6mm connections), magnetic clutch RV-100 (1x M30  connection) as well as two 8mm swagelok connections.

釜体夹套结构带底阀( 无内衬)

5830065

NR-3000

反应釜套装

SS J

NR-3000 Set of basic reactor made of SS  316TI with jacket, volume 3500mL for usage with bottom drain valve.Includes  reactor vessel with welded-on and isolated jacket for heating/coo领 with  circulation heater/cooler, lid made of SS 316TI, O-seal ring (FPM,  143x4,0mm), manual quicklock closure ring, standard fittings ( rupture disc  made of Monel, 25bar, with rupture disc holder and vent valve, nominal width  4mm), two handles and connection ports for heating/coo领 coil (2x 6mm  connections), magnetic clutch RV-100 (1x M30 connection), bottom drain valve  as well as two 8mm swagelok connections.

釜体内衬

5830100

NR-3000 PTFE内衬

NR-3000 PTFE-linig consisting of  lid-lining, lining of dip-tube, PTFE O-Ring(127x4,0mm) and PTFE-insert  (3000ml)(Working termperature Tmax > 230℃ )仅适合无底阀反应釜使用

通用附件

5727090

RV 100 磁耦轴承

Magnetic clutch RV 100/SS (torque 100  Ncm, 300 ℃ ,max. 4000 mPas (1.5 cP) at 10,000ml, made of SS) foruse with  anchor stirrer made of SS 316 TI

5727400

RV-400 SS 磁耦轴承

Magnetic clutch RV 400 made of SS 316 TI  with Reed contact, torque 400 Ncm, 300℃ , EX-proof zone 1

5945920

锚式搅拌浆，SS

Anchor stirrer made of SS 316 TI

5701017

PTFE 高压泄压管

PTFE High pressure tubing (2.5m; ID 9mm;  550bar)

Exhaust tubing for rupture discs,  G3/8" female (inlet)-G 3/8" male (outlet)

5708198

O- 型圈

O-ring 157×4 mm made of Viton  for reactors without PTFE-lining

5751455

爆破片 25bar

Rupture disc made of Monel, D 24mm, 25bar  with PFA protection foil and certificate

其他可选配件、备用件

阀门

不同材质的底部排水阀及氧气阀门可选

压力测量

多型号压力表和压力传感器可选

加热/ 冷却盘管

不锈钢材质，另有带PTFE涂层的盘管可选

磁耦合传动轴堵头

不锈钢材质和带PTFE涂层的不锈钢堵头可选

通用附件

高压管路、泄压阀、氧气阀门、液体进样、

加热搅拌单元

多型号顶置式搅拌、搅拌桨、温度控制器、加热套、恒温夹套、热电偶传感器可选

搅拌单元安装附件

弹性联轴器、电机固定架、磁耦合传动轴等附件可选

升降支架

For a functioning configuration one lid  fixation and one reactor fixation are needed beside the basic lift system.多型号整体升降支架可选，

O 型圈

O-Ring ，多材质可选

CR5703000

回流冷凝管

Reflux Condenser for NR-3000 DN50 500mm

CR5703001

Coo领 Fin

Coo领 Fin 500mm