JEIO TECH 振荡培养箱 IST

IncubatorsIncubated Shakers (Benchtop Models)

培养箱 震荡培养箱 (桌上型)

Incubated Shakers (Benchtop Models)

震荡培养箱 (桌上型)

Digital incubating/ refrigerating benchtop shakers.Transparent lid offers great visibility and gas spring supports ensure hand-down hand领 of the samples by allowing immediate and easy access to your samples.

数显（制冷）震荡培养箱。 透明盖子方便观察内部的样品，气压式弹簧设计方便操作人员放入样品后立马盖上盖子。

型号

IST-3075/3075R
IST-4075/4075R

Features

特点

Operating Features

操作特点

General Control

通用控制

Intuitive touch screen LCD controller with easy icons and logical menus.

触摸屏式LCD控制器，图标和菜单栏简单易懂。

Automatic run is available with non-volatile set point memory after power interruption.

突然断电后有记忆功能，复电后自动运行。

Built-in RS-232 port and USB port for external control and data collection.

内置RS-232和USB接口，方便外联使用和数据的收集。

Shaking Control

震荡控制

Speed range: 10 to 500 rpm.

速度范围：10到500rpm

Orbit diameter: 19mm.

圆周式轨道运动直径：19mm

Timer range: 1 min. to 999 hr 59 min.

定时范围：1分钟到999小时59小时

Audible/Visible alarm activated by shaking speed deviation.

转速有偏差会声光报警。

Worry-free operation.

智能运行。
- Automatic shaking speed adjustment in case of excessive workload such as unbalanced load placement, unusual vibrations caused from unstable floor or external shock.

- 当系统负载运行的时候会自动调节转速（由于桌面不平引起负载不平衡和不正常的震荡）。

Shaker protection system against over-current, stalled platform check.

震动自我保护功能防止过载电流，检查平台时会自动停机。

Temperature Control

温度控制

Temperature range:
Amb.+5°C to 80 °C(for IST-3075 / 4075)
Amb.-15°C(Min. +15)to 80°C(for IST-3075R / 4075R)

温度范围：

室温+5°C 到 80 °C(适用 IST-3075 / 4075)

室温-15°C(zuidi15°C)到 80°C(适用 IST-3075R / 4075R)

Microprocessor PID control and auto-tuning.

微处理PID控制和自动调节功能。

Three point temperature calibration.

三点温度校准功能。

Mechanical over-temperature protection device.

机械过温保护装置。

Constructional Features

结构特点

Wide speed range even with heavy workload.

过载重量重的情况下也有速度范围广的特点。
- Equipped with a maintenance-free BLDC motor to generate smooth, quiet, uniform,
and yet powerful shaking motion.

- 直流无刷电机确保转速的平稳、安静、均匀并且强劲有力。

Repetitive task can be easily performed as the platform stops where it starts.

平台无论在运行前还是在停止后的位置始终如一。
- Stopping the shaking platform always at the same position is highly beneficial for automated dosing
or samp领 process.

- 运行停止后平台的位置保持在一个位置，方便配料或者样品的其它处理。

Pleasant test environment by the smooth acceleration and deceleration control.

平稳的加速和减速控制提供理想的测试环境。
- Smooth start and smooth stop function prevents chemical spills from flasks or test tubes.

- 平稳的启动和停机功能，能够防止化学药品从烧瓶或者试管中溢出。

Wide sample monitoring and convenient sample loading.

监控样品的视角广，也方便样品的安放。
- Convenient sample monitoring without affecting inside environment thanks
to the three side transparent acryl lid with bright LED lamps.

- 内部装有LED灯和三面透明的亚克力盖子方便样品的观察，也不影响内部的环境。
- Gas spring lid supports providing smooth motion, soft opening and closing.

- 气压式弹簧盖支撑，使得盖子能够平稳安全的打开和关闭。

Air-tight silicone door seal to provide excellent temperature uniformity.

密封的硅胶门可以保持内部温度的均匀。

Corrosion resistance stainless steel interior.

不锈钢的内部可以防腐蚀。

Three step adjustable high-velocity fan ensuring uniform temperature distribution and rapid thermal recovery after door open.

3档调节速度的风扇，能够确保在打开门之后温度分布均匀和快速恢复温度。

Environment-friendly CFC-free refrigerant.(for IST-3075R / 4075R)

不含氟利昂的制冷剂。（适用IST-3075R / 4075R）

RS-232 interface.

RS-232接口。