仪器网

欢迎您: 免费注册 仪器双拼网址:www.yiqi.com
首页-资讯-资料-产品-求购-招标-品牌-展会-行业应用-社区-供应商手机版
官方微信
仪器网-专业分析仪器,检测仪器平台,实验室仪器设备交易网 产品导购
VIP企业会员服务升级
仪器/ 产品中心/ 电子电工仪表/ 电子仪器仪表/ 滤波器/ 美国ConOptics 电光偏转器/电光偏转系统/EOD
收藏  

美国ConOptics 电光偏转器/电光偏转系统/EOD

联系方式:贺先生156-01689581

联系我们时请说明在仪器网(www.yiqi.com)上看到的!

为您推荐
美国ConOptics 电光偏转器/电光偏转系统/EOD 核心参数
信号频段: 低通 仪器分类: 无源
详细介绍

产品介绍:

电光偏转器/电光偏转系统/EOD

高精度gao效电光偏转器!

 

Conoptics公司生产的电光偏转器是效率高的光束角度改变器件。Conoptics的电光偏转器可以在一定范围内改变光线的偏转角度,并高精度地控制光线的偏转角度。Conoptics的电光偏转器在电光材料上加上四极子电场来产生使得折射率随着加的电压而产生线性变化。为了消除普通偏转器上的压电效应,Conoptics的电光偏转器选择合适的,特殊的方向给晶体加上电场,以此消除晶体压电效应。Conoptics的电光偏转器器件内没有可移动附件,长期使用下也不会有疲劳效应。


关键词:电光偏转器/电光偏转系统/EOD/ Electro Optic Deflection Systems/ EOD/ Electro Optic Deflector, EO Deflector


Conoptics公司生产的电光偏转器是效率高的光束角度改变器件。Conoptics的电光偏转器可以在一定范围内改变光线的偏转角度,并高精度地控制光线的偏转角度。Conoptics的电光偏转器在电光材料上加上四极子电场来产生使得折射率随着加的电压而产生线性变化。为了消除普通偏转器上的压电效应,Conoptics的电光偏转器选择合适的,特殊的方向给晶体加上电场,以此消除晶体压电效应。Conoptics的电光偏转器器件内没有可移动附件,长期使用下也不会有疲劳效应。



List of Deflectors

Model 310A

Aperture (mm)

2.5mm

Deflection Efficiency

1.5 micro-radians/volt

Capacitance, pf

100

Standard Spectral Range

400nm-to-750nm

Length (mm)

118mm

UV / DUV options

Yes


Model 311A

Aperture (mm)

2.5mm

Deflection Efficiency

3.0 micro-radians/volt

Capacitance, pf

185

Standard Spectral Range

400nm-to-750nm

Length (mm)

219mm

UV / DUV options

Yes

Collinear Configuration

Center In/Center Out


Model 312

Aperture (mm)

2.7mm

Deflection Efficiency

0.6 micro-radians/volt

Capacitance, pf

50

Standard Spectral Range

400nm-to-1100

Length (mm)

71mm

UV / DUV options

Yes

Collinear Configuration

Center In/Center Out


Model 312-2

Aperture (mm)

2.7

Deflection Efficiency

1.2 micro-radians/volt

Capacitance, pf

100

Standard Spectral Range

400nm-to-110nm

Length (mm)

125mm

UV / DUV options

Yes

Collinear Configuration

Center In/Center Out


Model 412-2Axis

Aperture (mm)

2.0mm

Deflection Efficiency

4 micro-radians/volt

Capacitance, pf

40

Standard Spectral Range

700nm-to-1000nm or 1000nm-to-2000nm

Length (mm)

110mm

UV / DUV options

No

Collinear Configuration

Center In/Center Out


Amplifier Key Features:


Model 302RM Amplifier

Cabinet

Driver and power supply in single   cabinet

Test Feature

Built-in test feature allows testing   for max transmission of Pockel Cell without adjusting bias voltage

Input Impedance

Choice of amplifier input impedance by   rear panel switch (50ohm/1K ohm)

DC Bias

Improved DC biasing of Pockel Cell   provides greater linearity at higher bias voltages

Voltage Range

+/- 450VDC controlled by ten-turn   front panel pot. Digital meter monitors differential bias applied to E.O.   Modulator

Linearity

10bits referenced to full scale (.1%)

Bandwidth

DC to >200Khz with 90pf load and 3M   (RG-62) cables

Max. Output Drive Level

750VP-P into 90pf load

Amplifier Input Signal

2VP-P max into 50/1K ohms delivers   750VP-P out

Input Signal Format

Options include Unipolar positive,   negative or bipolar

Input Power (AC)

60W typical. Input power is both load   (modulator) and frequency dependent.

Dimensions

19” Rack Mountable, 5.25”H(133mm) (3U)   x 14”D (356mm)

Cooling

Forced air

Operating Environment

Designed for laboratory use (indoor   only) Temperature range +5deg C to +50deg C ambient Humidity   20%-80% RH up to 32deg C Altitude <3000M

Weight

20lbs (9.07kg)


Model 412 Dual Amplifier

Cabinet

Driver and power supply in single   cabinet

Input Impedance

Choice of amplifier input impedance by   rear panel switch (50ohm/1K ohm)

Gain

375V/V Each Amplifier

Max. Output Drive Level

750V P-P, each amplifier, driving 60pf   load, 3m RG-62 cables

Detected Rise/Fall Time

Typically 2.5us driving 60pf with 3m   RG-62 coax

Input Signal Format

Options include Unipolar POS/NEG or   bipolar set by rear-panel slide switch

Input Power (AC)

Typically 70W (load and frequency   dependent)

Dimensions

19” Rack Mountable, 5.25”H(133mm) (3U)   x 14”D (356mm)

Cooling

Forced air

Operating Environment

Designed for laboratory use (indoor   only) Temperature range +5deg C to +50deg C ambient Humidity   20%-80% RH up to 32deg C, Altitude <3000M

Weight

20lbs (9.07kg)


Model 25D Amplifier

Cabinet

Driver and Power Supply in same   cabinet

Input Impedance

50ohms

Gain

+/- 400vDC

Max. Output Drive Level

175V

Detected Rise/Fall Time

8ns

Input Signal Format

TTL or Analog

Input Power (AC)

300W

Dimensions

1125px W x 1100px L x 437.5px H

Cooling

Forced Air

Operating Environment

Designed for laboratory use (indoor   only)

Weight

32lbs


Related Products

M312-1


Model 310A Outline Drawing


Model 320 Nutator Deflector


Model 412 Deflector Cutout


厂商相关其他产品
X您尚未登录
账号登录
X您尚未登录
手机动态密码登录
X您尚未登录
扫码登录
在线留言
官方微信

仪器网微信服务号

扫码获取最新信息


仪器网官方订阅号

扫码获取最新信息

在线客服

咨询客服

在线客服
工作日:  9:00-18:00
联系客服 企业专属客服
电话客服:  400-822-6768
工作日:  9:00-18:00
订阅商机

仪采招微信公众号

采购信息一键获取海量商机轻松掌控