|
荧光和拉曼的激发光源>>LS-450LED光源 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
LS-450LED光源
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
LS-450, R-LS-450, R-LS-450-2 |
USB-LS-450 Drive Module |
|
物理尺寸 |
90 mm x 50 mm x 32 mm (LS-450 only) |
89 mm x 102 mm x 38 mm |
|
能量消耗 |
25 mA @ 12 VDC |
60 mA @ 5 VDC |
|
能量输出(最小) |
50 into 600 fiber |
60 into 600 fiber |
|
稳定性 |
<1.0% after 2-minute warm-up |
<1.0% after 2-minute warm-up |
|
LED驱动电流 |
NA |
20 mA +/-150 mA |
|
Item |
Description |
|
LS-450 |
Blue LED produces output at 470 nm; includes interface cable to S2000; can be mounted with an S2000 or installed into rack or desktop boxes |
|
R-LS-450 |
Rack-mounted version of Blue LED produces output at 470 nm; includes interface cable to S2000 |
|
R-LS-450-2 |
Rack-mounted version of dual Blue LEDs produces output at 470 nm; includes interface cable to S2000 |
|
USB-LS-450 |
Multi-purpose LED module for USB2000-FL Spectrometers has built-in 24-bit A/D converter to accommodate a 100 ohm Resistance Temperature Device; also has on-board memory to store temperature and oxygen calibration coefficients when used with FOXY Oxygen Sensors |
|
USB-LS-450-4/20 |
Add-on to USB-LS-450 LED drive module provides 4-20 mA output. |
|
USB-LS-450-TP |
Platinum 100 ohm Resistance Temperature Device, for use with USB-LS-450 LED module. |
|
Item |
Description |
Color |
Power* |
|
LED-380 |
380 nm wavelength UV LED used in place of the 470 nm bulb in the LS-450 |
UV |
45 |
|
LED-395 |
395 nm wavelength VIS LED used in place of the 470 nm bulb in the LS-450 |
Violet |
25 |
|
LED-518 |
518 nm wavelength VIS LED used in place of the 470 nm bulb in the LS-450 |
Green |
35 |
|
LED-590 |
590 nm wavelength VIS LED used in place of the 470 nm bulb in the LS-450 |
Yellow |
40 |
|
LED-640 |
640 nm wavelength VIS LED used in place of the 470 nm bulb in the LS-450 |
Red |
50 |
|
LED-WHITE |
450-630 nm wavelength VIS LED used in place of the 470 nm bulb in the LS-450 |
White |
50 |
|
LED-KIT |
Set of 6 LEDs: LED-380, LED-395, LED-518, LED-590, LED-640 and LED-WHITE |
Mixed |
Mixed |
报价:面议
已咨询1515次
报价:面议
已咨询403次宽带光源
报价:面议
已咨询414次LED光源
报价:面议
已咨询612次LEDs
报价:面议
已咨询751次LED光源
报价:面议
已咨询420次宽带光源
报价:面议
已咨询477次宽带光源
报价:面议
已咨询564次易耗品
300W-LED光源的特点 1. 全部采用LED单株集成平面封装阵列,实现300W大功率输出; 2. 采用纯铜基座、7铜管散热、镀镍铝散热鳍片,实现LED灯泡的快速散热; 3. LED光电转换效能高,消耗能量较同光效的光源减少80%; 4. LED单色性好、光谱单一、能量一致、灯泡寿命长、单次实验时间内光衰减可忽略不计; 5. 光源出光口配有光路转向装置,可以实现实验的任意角度照射; 6. 光路透镜组采用K9光学玻璃透镜,实现出光口光斑大小的调节; 7. 光源系统采用PLC程序控制,可以根据用户需求更改或升级程序; 8. 采用4.3英寸触摸屏,完成各种功能设置; 9. 实现光输强度、工作电流、工作时间、温度控制、程序控制的调节; 10.光源散热为强制风冷且光路和风路分开,保证出光稳定;
奥林巴斯BX43正置生物显微镜LED光源可以让您根据需要在经济型和配置型之间作出选择。诸如符合人体工学的观察筒和载物台等模块化组件可以让您根据应用情况轻松定制显微镜。
原装进口价格优惠
奥林巴斯胃肠镜CV-170,CV-290价格参数.飞利浦彩超机EPIQElite,便捷式彩超CX50,CV650,CV550,A70,A50,A30飞利浦彩超 心脏探头,四维探头,浅表探头,腹部探头,腔内探头,高频探头,凸阵探头等
1. 采用优质元器件单株集成阵列,可靠性能高; 2. 抗干扰性能好。 3. 直流纹波小,工作效率高; 4. 工作温度低,使用寿命长; 5. 输入电压范围宽,符合全球使用标准; 6. 绝缘性能好,抗电强度高; 7. 具有短路,过载,过压保护功能; 8. 满负荷高温烧机,100%老化测试; 9. 输出电流可调; 10. 单色性好,光谱单一,能量一致,可以作为标准光源; 11. 可以实现光输出强度的任意调节,并快速稳定; 12.保护功能.输出短路、过流、过压自动保护,故障排除后自动恢复正常工作。
0
传统的近红外光源,检测灵敏度低,干扰多 工作在中红外的LED,吸收强度更好,测量灵敏度更高。相对成本性价比更高。 真正的室温下连续波长工作 高输出功率,大于1mW 宽带的红外光源 封装可以定制 用于检测可燃气体、挥发性气体(VOC),温室气体等,