英语翻译《名企核心人才培养管理笔记》

囡囡夕爻 2017-07-02 14:49:48 478 浏览

英语翻译《名企核心人才培养管理笔记》

参与评论

登录后参与评论

全部评论(1条)

哎呀果儿啊 2017-07-03 00:00:00

没有逐字翻译，如果是书名的话，感觉英文里笔记一词如果加进去感觉有点累赘，Z后如下： Training and Management of Core Talents for famous enterprises 供你参考。

赞(6)

回复(0)

评论

评论
登录后参与评论

热门问答

英语翻译《名企核心人才培养管理笔记》: 英语翻译《名企核心人才培养管理笔记》

如何搞好人才培养管理和使用征求意见:

实验室管理系统要有哪些核心功能？

实验室管理系统LIMS以实验样品为主体驱动、以检测过程管理为中心环节、以认证认可规范为质量保证，以检测报告为核心。以实现实验室的高效和科学管理为目标，King'sLIMS系统为检测行业实现数字化转型赋能，将实验室中不易管理的人、机、料、法、环等因素有效的进行了流程化控制，其核心功能就是检验流程控制、质量控制、数据跟踪溯源。

主要分为三个模块：流程管理、质量管理和辅助管理。

流程管理主要是样品检测到出报告的管理。

质量管理主要是17025标准规定的人、机、料、法、环的全面质量管理。

辅助管理就是其他的办公管理。

2021-09-29 16:35:37 236 0

高等职业院校人才培养工作状态数据采集与管理平台课程怎么填:

英语翻译: UNIPHOS-400 multiparameter UV/IR based Fire Detector detects fire by detecting simultaneously three important characteristics of fire viz. UV radiation in the solar blind region of 185-260 nm， IR emission from the hot CO2 which invariab... UNIPHOS-400 multiparameter UV/IR based Fire Detector detects fire by detecting simultaneously three important characteristics of fire viz. UV radiation in the solar blind region of 185-260 nm， IR emission from the hot CO2 which invariably is present in and around a fire and the continuum black body IR radiation from the fire. This microprocessor based detector is housed in a flameproof enclosure with a viewing window. It is mounted on a wall mountable stand with provision to adjust the field of view to bring the viewing window in line of sight of the likely spot where fire can occur. The detector gives a fire alarm (red led glows) when all the three chosen fire parameters are detected. Simultaneously a relay output is available. When any one of IR or UV radiation is detected yellow led glows to give a warn alarm and also a relay output is available. The detector also provides an analog 4-20mA output and a RS485 digital output to indicate the above events. 展开

英语翻译: Forexample，intest，measurement，andcontrol，engineershaveusedvirtualinstrumentationtodownsizeautomatedtestequipment(ATE)whileexperiencinguptoa10timesincreaseinproductivityga... For example， in test， measurement， and control， engineers have used virtual instrumentation to downsize automated test equipment (ATE) while experiencing up to a 10 times increase in productivity gains at a fraction of the cost of traditional instrument solutions. Last year 25，000 companies in 90 countries invested in more than 6 million virtual instrumentation channels from National Instruments. 会的人帮忙翻译一下，我翻译的不通顺，没有中文的感觉。请高手帮助！菜鸟级别绕道。展开

谁有细胞生物学笔记？:

英语翻译求助: The scheduler function involves planning how to produce the current volume of orders in the FMS， considering the current status of machine tools， work-in-process， tooling， fixtures， and so on. [91 The scheduling can be done automatically or... The scheduler function involves planning how to produce the current volume of orders in the FMS， considering the current status of machine tools， work-in-process， tooling， fixtures， and so on. [91 The scheduling can be done automatically or can be assisted by an operator. Most FMS control systems combine automatic and manual scheduling; the system generates an initial schedule that can be changed manually by the operator. The dispatcher function involves carrying out the schedule and coordinating the activities on the shop floor， that is， deciding when and where to transport a pallet， when to start a process on a machining center， and so on. The monitor function is concerned with monitoring work progress， machine status， alarm messages， and so on， and providing input to the scheduler and dispatcher as well as generating various production reports and alarm messages. A transport control module manages the transportation of parts and palettes within the system. Having an AGV system with multiple vehicles， the routing control logic can become rather sophisticated and become a critical part of the FMS control software. A load/unload module with a terminal at the loading area shows the operators which parts to introduce to the system and enables him or her to update the status of the control system when parts are3. Materials Handling System The automated materials handling system is a fundamental component that helps mold a group of independent CNC machines into a comprehensive FMS. The system must be capable of accepting workpieces mounted on pallets and moving them from workstation to workstation as needed. It must also be able to place workpieces on hold as they wait to be processed at a given workstation. The materials handling system must be able to unload a workpiece at one station and load another for transport to the next station. It must accommodate computer control and be completely compatible with other components in the flexible manufacturing system. Finally， the materials handling system for an FMS must be able to withstand the rigors of a shop environment. Some FMSes are configured with automated guided vehicles (AGVs) as a principal means of materials handling. 展开

跪求英语翻译。: Experiment SiO2 films with a thickness of 300 nm were grown on (100) p-Si substrates， with a resistivity of 4 W cm， using thermal oxidation at 1，000 C， for 90 min. Monte Carlo simulationcode (TRIM) was used to calculate the adequate ene... Experiment SiO2 films with a thickness of 300 nm were grown on (100) p-Si substrates， with a resistivity of 4 W cm， using thermal oxidation at 1，000 C， for 90 min. Monte Carlo simulationcode (TRIM) was used to calculate the adequate energy in order to place the maximum Ge concentration at the middle of the SiO2 film. SiO2 matrices were implanted with Ge74+ ions at RT， with 250 keV energy， using implantation doses of [0.5， 0.8， 1， 2， 3 and 4] · 1016 cm–2. After ion implantation， the samples were annealed at 1，000 C for 1 h in a forming gas atmosphere to precipitate Ge and to form the nanocrystallites. Raman spectra were obtained using a triple grating T- 64000 Jobin-Yvon spectrometer， with 1 cm–1 spectral resolution. The 514 nm line of the argon laser was used to excite the samples. All samples were measured at RT; the laser power on the sample was 9 mW. The diameter of the laser spot was 50 lm and the integration time was 30 min. The resonant Raman spectra were obtained in the backscattering configuration. The orientation of the Si substrate is fundamental to polarize the laser light， allowing the second-order Raman Si peak， at about 300 cm–1， to be suppressed not masking the Raman peaks corresponding to Ge-nc. PL spectra were measured at RT with a 240 nm excitation source， using a Spex Fluoromax spectrometer with a R298 Hamamatsu photomultiplier. Compositional analysis of the SiO2 matrix was carried out using a DIGILAB infra-red Fourier transform spectrometer. The system was purged with dry N2 to reduce the infrared (IR) absorption from H2O and CO2. Transmittance measurements were carried out within the 400– 4，000 cm–1 range at 300 K. The beam spot size was about 5 mm diameter and the resolution was 4 cm–1. In all cases a non-processed Si substrate sample was used as a reference. Results and discussions Figure 1 presents the Raman spectra of the films implanted with various doses [0.5; 0.8; 1; 2; 3; 4] · 1016 cm–2， followed by annealing forming-gas， (92% N2 + 8% H2) at 1，000 C， for 1 h. The position of the peak for bulk Ge was determined at 302.4 cm–1 and this value is used to compare with Ge-nc peaks. The Raman spectra of the implanted samples clearly show three bands: 210–280， 304 and 430 cm–1. The first one， 210–280 cm–1， is associated with amorphous Ge compounds. Such band was expected as the samples have been annealed at 1，000 C， therefore above the Ge melting temperature (938.3 C) [10]. At this temperature， Ge precipitates as liquid droplets inside a viscous oxide matrix. The second band was near 304 cm–1， and can be associated with Ge-nc. This band is in good agreement with the work reported by Wu et al. [11]. Finally， the third band at 430 cm–1 is related to local Si–Si vibrations [12]. 展开

科技英语翻译: 哪位高手帮忙翻译一下，非常感谢！！！ Casted titanium for dental crowns has been investigated by means of X-ray Photoelectron Spectroscopy (XPS)， X-Ray Diﬀraction (XRD) and Scanning Electron Microscopy (SEM). The samples were prepare... 哪位高手帮忙翻译一下，非常感谢！！！ Casted titanium for dental crowns has been investigated by means of X-ray Photoelectron Spectroscopy (XPS)， X-Ray Diﬀraction (XRD) and Scanning Electron Microscopy (SEM). The samples were prepared according to the Ohara process. XRD analysis revealed that the investment consisted essentially of SiO2， Mg2P2O7， SiO2•H2O and Mg2SiO4. SEM experiments combined with EDX analysis revealed the following atomic concentrations Si (62.6%)， Mg (19.7%)， P (17.1%)， and Ca (0.6%). After casting， the titanium samples exhibit a rough and irregular surface， and XRD analysis indicated that titanium contains essentially the α phase and traces of the β phase. After demoulding titanium samples， the investment side which was in contact with titanium was black colored， proving the reaction between titanium and the investment. XPS analysis performed on this side of the investment indicated that the Si 2p peak presents a shoulder on the low binding energy side and thus suggest that SiO2 has been transformed into metallic Si. 展开

英语翻译(2): Keywords:Epoxides;Amines;2-Aminoalcohols;Yttriumnitratehexahydrate;RegioselectivityAminoalcoholsconstituteanimportantclassofcompoundshavingbothchemicalandbiologicalapplic... Keywords: Epoxides; Amines; 2-Amino alcohols; Yttrium nitrate hexahydrate; Regioselectivity Amino alcohols constitute an important class of compoundshaving both chemical and biological applications. They are important pharmacophores present in various inhibitors and are used as building blocks for the synthesis of biologically active natural products， insecticidal agents and chiral auxillaries for asymmetric reactions.1a–f They act as starting materials for the synthesis of oxazolines which are useful in the polymer industry.1g Owing to their widespread applications， the synthesis of amino alcohols has received much attention in recent years. Traditionally， 2-amino alcohols are prepared by heating an epoxide with an excess of amine at elevated temperature. The use of a high temperature leads to undesired side reactions and also limits the applicability towards temperature sensitive substrates. To overcome these drawbacks various promoters such as ZnCl2，2 ScOTf，3 MgBr2OEt2，4 67 9 bismuth salts，5 CoCl2， CuBF4， DIPAT，8 Ti(OiPr)4， 1011 12TaCl5， ZrCl4， Sm(OTf)3， potassium dodecatungstocobaltate， 13 and aluminosilicate14 have been employed for the above transformation. The use of non-conventional techniques such as microwave irradiation at elevated temperaturehas also been reported.15 Recently， the use of Al(OTf)3 (1 mol %) as catalyst in toluene at reflux has also been reported.16 Although significant advances have been made in this area， low regioselectivity， longer reaction time， use of elevated temperature， high catalyst loading， toxic solvents and lower substrate compatibilitylimit their applications.Thus there is a need to develop an efficient catalytic protocol for ring opening of various epoxides with aliphatic， aromatic andheteroaromatic amines under ambient conditions 展开

药学英语翻译: Havingbrieflyexaminedthestructureoforganicpackingsandthevariousroutesintheirmanufacture，themostimportantfeaturesmaybesummarizedasfollows:>Hydrophilicaswellaslipophilicorg... Having briefly examined the structure of organic packings and the various routes in their manufacture， the most important features may be summarized as follows: > Hydrophilic as well as lipophilic organic packings are synthesized with a controlled pore and surface structure depending on the type of monomer/comonomer and the polymerization reaction. Surface structure can be altered by controlled consecutive surface reactions. > In accordance with the bulk composition， polymer packings are stable across almost the entire pH range， particularly under strong alkaline conditions. > Chemical stability is affected by oxidizing and reducing solutions. > Although cross-linking reactions have been optimised in as much as rigid pressure stable particles can be manufactured， some remaining swelling property is often noted when changing the solvent composition in HPLC. > As in the manufacture of silica， porosity， pore size， and surface area of polymer packings can be adjusted over a wide range， and micro-， meso-， and macro- as well as non-porous beads are synthesized reproducibly. 3.2.4.2 Hydrophobic Polymer Stationary Phases The synthesis of cross-linked copolymers of styrene and divinylbenzene has been studied intensively and is well documented. The starting monomer is styrene， and divinylbenzene (DVB) is used as cross-linker. The amount of DVB can reach up to 55wt.%. At 55% DVB， the copolymer shows practically no swelling and possesses a permanent porosity. Figure 3.21 illustrates the network structure of poly(styrenedivinylbenzene) (St-DVB). Commercial products differ in bead size and pore size. There are even non-porous products on the market， designed for the rapid separation of peptides and proteins by reversed phase HPLC (Maa and Horvath， 1988). St-DVB copolymers are stable in the pH range 0–14. They find increasing application in the separation of low molecular weight compounds， peptides， and proteins by means of reversed phase chromatography (Tanaka et al.， 1987， Tweeten and Tweeten， 1986) and as parent materials for the synthesis of derivatized packings in interaction chromatography of biopoly-mers (Unger et al.， 1987， Regnier， 1987). Numerous other organophilic polymer packings have been synthesized for size exclusion and interactive HPLC after suitable derivatization. They are reviewed in depth by Mikes (1988). 展开