带有内嵌体通道中润滑油流动的显微PIV测量

Grease is commonly used to lubricate various machine components such as rol领 element bearings, open gears etc. Better understanding of the flow properties of grease will contribute to understanding the lubrication mechanism in bearings and flow in lubrication systems. In an earlier paper Micro Particle Image Velocimetry (PIV) techniques were used to study the flow in a rectangular channel. The present paper is an extension of this work where restrictions were applied in such a channel, which creates a much more complex velocity field. The grease is seeded with fluorescent particles, which are illuminated by a double-pulsed laser. The test geometries that are used in this study are a channel with one flat restriction and one with two flow restrictions in a similar channel. The stationary grease mass-flow and the two dimensional velocity fields have been monitored for different pressure drops. For the channel with one flat restriction, the flow was measured to be symmetric at the inlet and outlet, and the distance for the flow to fully develop is comparable with the height of the channel; Slow motion was followed near the step corner at the inlet. For the channel with two flow restrictions, the vector profiles show that the maximum velocity appears at the restrictions; In-between the two restrictions, a part of the grease is not moving. This particularly applies to cases with low-pressure drop and where high consistency grease was used. 显微粒子成像测速系统(Micro PIV) Imager intense PIV相机 用于粒子成像测速(PIV)的荧光示踪粒子