uestions often arise as to how much residual biodegradable matter remains in sludges from biological processes after previous treatment has been completed( EPAs F-bio test). In one case, sludge samples were removed from two facultative lagoons. Tests were conducted to determine the methane potential remaining in the sludges and to determine if the sludges were suitable for land spreading. Samples of the sludge containing 20.5 and 22.7 g VSS were transferred to respective reaction vessels and methane production was measured over a period of 18 days. Methane production ranged from 120 mL in one sample to 160 in the second sample as shown in the Figure below. The gas production rate was high for only about 2 days and then leveled off to a rate of about 4 mL/day. The COD conversion equivalent of the produced gas was only about 0.3 to 0.4 g per sample, thereby representing VSS conversions of 1.47 and 1.76 %. The sludge was then deemed to be suitable for land application without further treatment.
The methane production activity of anaerobic sludges i
操作模式: 有氧模式-供应纯氧-微小增量的纯氧注 入呼吸仪的每个容器以响 应氧气和二氧化碳的减 少,这种操作
与4位8位16位及24位反应系统,windows图形软件环境,每个反应容器的数据收集是独立的, 这些数据汇入
缺氧或厌氧模式- 生物反应产生的气体 流入内部储存室并在内置压力传感器探测到达压力后释放,此增量RSA出厂时
OUR fingerprints can be used to estimate kinetic param
根據前期研究結果顯示,實驗室所分離之純菌株 Rhodococcus rubber N4 在過飽和含顆粒性時,
聚合物在日常生活中扮演重要的角色,我们最熟悉的聚合物 — 塑料几乎渗透到工作生活的方方面
"全文请访问:http://www.spm.com.cn/papers/p47.pdf 应用扫描隧道显微技
采用微型喷雾干燥仪B-290,对基于聚乳酸(PLA)及聚乳酸-乙醇酸共聚物的可生物降解聚合物成功地进行了喷雾