780、925、1030、1064、1550nm模块式皮秒/飞秒激光器
朗研光电1550nm光纤皮秒飞秒激光器ErPico ProL400超短超快脉冲
朗研光电1.5μm波段ErFemto ProH2.0光纤超短脉冲皮秒飞秒激光器
皮秒半导体激光器
皮秒/纳秒光纤激光器
PT403 系列波长可调谐皮秒激光器
210 至 2300 nm 输出波长
1 kHz 重复频率
15 ps 脉冲宽度
OPO 和泵浦激光器集成在一个机箱中
产品特色和应用
High pulse energy at kHz rates
Diode pumped solid state design
Air cooled – external water supply is not required
Turn-key operation
Low maintenance costs
Optional streak camera triggering pulse with <10 ps rms jitter
Hands-free wavelength tuning
Tuning range from 210 nm to 2300 nm
Narrow linewidth <8 cm?1
Low divergence <2 mrad
PC control
Time resolved fluorescence, pump-probe spectroscopy
Laser-induced fluorescence
Infrared spectroscopy
Nonlinear spectroscopy: surface-SH, Z-scan
Other spectroscopic and nonlinear optics applications
Better long term stability (compared with layout where laser and OPO are in different units)
Higher safety – all beams are in the box
Shorter installation time
Almost twice smaller footprint
产品概述
PT403 series laser systems integrate a picosecond 1 KHz repetition rate DPSS pump laser and optical parametric generator into a single housing. New picosecond tunable wavelength laser system provide from 210 to 2300 nm from the one box.
Unlike other solutions in the market, offering laser and OPO in different units, new approach features pump laser and OPO integrated into one unit. That delivers almost twice smaller footprint, shorter installation, better stability and other substantial benefits for user.
All-in one-box solution features all components placed into one compact housing. It means better overall stability because all potential causes for misalignment between separate units of pump laser and optical parametric generator are eliminated.
To ensure reliability industry and market tested solutions were employed during the build-up of PT403.
Pump laser is based on industry “gold standard” diode pumped Ekspla PL2210 series picosecond mode-locked laser. Improved output parameters and reduced maintenance costs are achieved by employing diode-pumped-only technology.
Optical parametric generator is based on PGX03 picosecond optical parametric amplifier systems. Fully automatized and microprocessor based control system ensures hands free precise wavelength tuning.
PT403 was built without sacrificing any parameters or reliability. The optical design is optimized to produce low divergence beams with moderate linewidth (typically <8 cm?1) at approximately 15 – 20 ps pulse duration. Featuring 1 KHz repetition rate PT403 tuneable laser is versatile cost-efficient tool for scientists researching various kind of disciplines like time resolved fluorescence, pump-probe spectroscopy, laser-induced fluorescence, Infrared spectroscopy and other aplications.
For customer convenience the system can be controlled through its USB type PC interface (RS232 is optional) with LabView™ drivers or a remote control pad. Both options allow easy control of system settings.
性能指标
| 型号 | PT403 | PT403-SH |
|---|---|---|
| OPA 指标 1) | ||
| Output wavelength tuning range | ||
| SH | – | 210 – 410 nm |
| Signal | 410 – 709 nm | |
| Idler | 710 – 2300 nm | |
| Output pulse energy 2) | ||
| SH 3) | – | 10 μJ |
| Signal 3) | 70 μJ | |
| Idler 4) | 15 μJ | |
| Pulse repetition rate | 1000 Hz | |
| Linewidth | <8 cm-1 | |
| Typical pulse duration 5) | 15 ps | |
| Scanning step | ||
| SH | – | 0.05 nm |
| Signal | 0.1 nm | |
| Idler | 1 nm | |
| Typical beam size 6) | ~ 3 mm | |
| Beam divergence 7) | < 2 mrad | |
| Beam polarization | ||
| SH | – | horizontal |
| Signal | horizontal | |
| Idler | vertical | |
| 运行环境需求 | ||
| Room temperature | 22 ± 2 °C | |
| Power requirements | 100 – 240 V single phase, 47 – 63 Hz | |
| Power consumption | <120 W | |
| Water service | not required, air cooled | |
Due to continuous improvement, all specifications are subject to change without notice. Parameters marked typical are not specifications. They are indications of typical performance and will vary with each unit we manufacture. Unless stated otherwise, all specifications are measured at 450 nm for PT403 units for basic system without options.
Pulse energies are specified at selected wavelengths. See typical tuning curves for pulse energies at other wavelengths.
Measured at 250 nm.
Measured at 1000 nm.
Estimated assuming 30 ps at 1064 nm pump pulse. Pulse duration varies depending on wavelength and pump energy.
Beam diameter at the 1/e2 level. Can vary depending on the pump pulse energy.
Beam divergence measured at 450 nm.
Note: Laser must be connected to the mains electricity all the time. If there will be no mains electricity for longer that 1 hour then laser (system) needs warm up for a few hours before switching on.
照片和图纸
PT403 series laser head typical outline drawing
Compared with layout where laser and OPO are in different units, PT400 features almost twice smaller footprint
PT403 tunable picosecond laser features compact power supply and is air cooled – external water supply is not required
报价：面议
已咨询431次皮秒/飞秒激光器
报价：面议
已咨询381次皮秒/飞秒激光器
报价：面议
已咨询371次半导体激光器
报价：面议
已咨询401次激光放大器
报价：面议
已咨询470次半导体激光器
报价：面议
已咨询126次皮秒激光器
报价：面议
已咨询326次皮秒/飞秒激光器
报价：面议
已咨询25次可调谐激光器
营业执照未审核
分享
收藏
沪公网安备 31011502008050号