德国LaVision Shake-the Box 高空间分辨体视粒子跟踪测速

FlowMaster 4D-PTV / Shake-the-Box

Shake-the-Box is the most advanced 3D Lagrangian Particle Tracking Velocimetry (PTV) method for densely seeded flows at highest spatial resolution. Compared to the voxel-based Tomo-PIV approach Shake-the-Box is a purely particle-based technique using an Iterative Particle Reconstruction (IPR) technique in combination with an advanced 4D-PTV algorithm using the time-information for track reconstruction. Shake-the-Boxachieves a higher reconstruction accuracy at much faster processing speed compared with its TR-Tomo-PIVcounterpart.
Beside different DaVis software packages FlowMaster systems for TR-Tomo-PIV and Shake-the-Box are using the same hardware.

MiniShaker: compact 3D camera for volumetric flow measurements

The MiniShaker is an aligned multi-sensor system in a compact housing for quick and easy volumetric flow measurements. Integrated into LaVision’s DaVis software, Shake-the-Box (4D-PTV) as well as Tomographic PIV flow fields are readily obtained. The power supply and data transfer of the system both use USB-3 interfaces largely simplifying installation and operation.

The MiniShaker is available in three models and with adaptable lenses for diverse measurement tasks. In combination with LaVision’s cost-effective LED-Flashlight it is ideal for measurements of water applications. Mounted to a robotic arm and combined with Helium-filled Soap Bubbleseeding, the flexible system is most appropriate for large-scale flow analysis of low- to mid-speed wind tunnel and convective air flow applications.

Large Scale PIV/PTV in air

Air seeding with μm-particles is not suitable for large scale PIV/PTV experiments due to their limited scattering power. Neutrally buoyant Helium-filled Soap Bubbles (HFSB) with a diameter of 0.3 mm and a response time less than 15 μs scatter 10000x more light than μm-particles and, therefore, are suitable for large scale PIV/PTV experiments in the lower subsonic regime.
LaVision’s HFSB Seeding Generatorcan deliver 0.3 mm mono-sized bubbles at a production rate of 40000 bubbles per second and per nozzle and can operate simultaneously up to 60 nozzles in parallel. The typical life time of the Helium-filled soap bubbles is a few minutes. Furthermore, the increased scattering intensity allows to switch from laser to LED illumination, greatly reducing the cost of the light source.